P247F Dodge Code - Exhaust Gas Temperature Out of Range Bank 2 Sensor 4
Quick Answer
The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out of range high values. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 4, Exhaust Gas Temperature Sensor Bank 2 Sensor 4 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 4 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P247F Dodge indicates Exhaust Gas Temperature Out of Range Bank 2 Sensor 4.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 4, Exhaust Gas Temperature Sensor Bank 2 Sensor 4 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 4 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P247F Dodge Description
What are the Possible Causes of the DTC P247F Dodge?
- Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 4
- Exhaust Gas Temperature Sensor Bank 2 Sensor 4 harness is open or shorted
- Exhaust Gas Temperature Sensor Bank 2 Sensor 4 circuit poor electrical connection
- Exhaust leaks
- Excessive particulate matter buildup on sensor
How to Fix the DTC P247F Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P247F Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P247F Dodge code?
Need more information on how to fix the P247F Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P247F Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P247F Dodge Code
1. What are common symptoms of OBDII code P247F Dodge?
- Common symptoms include reduced engine performance, increased fuel consumption, and the illumination of the check engine light.
2. What does the OBDII code P247F Dodge indicate?
- This code indicates that the exhaust gas temperature for Bank 2 Sensor 4 is out of the expected range set by the vehicle's computer.
3. What are possible causes of code P247F in a Dodge vehicle?
- Possible causes include a faulty exhaust gas temperature sensor, exhaust leaks, damaged wiring, or issues with the engine control module.
4. How can I diagnose the cause of OBDII code P247F in my Dodge?
- Diagnosing this code may involve using a scan tool to monitor the exhaust gas temperature sensor readings, visually inspecting the sensor and related components, and checking for any exhaust leaks.
5. Can I continue driving my Dodge with code P247F present?
- It is not recommended to continue driving with this code present, as it can lead to further damage to the engine and emissions system.
6. How can I repair OBDII code P247F in my Dodge?
- Repairing this code may involve replacing the faulty exhaust gas temperature sensor, repairing any exhaust leaks, fixing damaged wiring, or reprogramming the engine control module.
7. Are there any DIY tips for resolving code P247F in my Dodge?
- DIY tips include checking for visible signs of damage to the sensor and wiring, ensuring proper connections, and clearing the code with a scan tool after performing repairs.
8. Does OBDII code P247F affect vehicle safety?
- While this code may not directly affect vehicle safety, it can impact engine performance and emissions, leading to potential long-term issues if not addressed promptly.
9. How long does it typically take to repair OBDII code P247F in a Dodge?
- The repair time can vary depending on the specific cause of the code, but it may take anywhere from 1 to 3 hours to diagnose and fix the issue.
10. Can code P247F be triggered intermittently in a Dodge vehicle?
- Yes, this code can be triggered intermittently, especially if the issue is related to a loose connection or intermittent sensor failure.
Discuss the causes and fixes for P247F Dodge OBDII Code
Code P247F Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
