P247E GMC Code - Exhaust Gas Temperature Out of Range Bank 2 Sensor 3
Quick Answer
The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out of range high values. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 3, Exhaust Gas Temperature Sensor Bank 2 Sensor 3 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 3 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P247E GMC indicates Exhaust Gas Temperature Out of Range Bank 2 Sensor 3.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 3, Exhaust Gas Temperature Sensor Bank 2 Sensor 3 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 3 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P247E GMC Description
What are the Possible Causes of the DTC P247E GMC?
- Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 3
- Exhaust Gas Temperature Sensor Bank 2 Sensor 3 harness is open or shorted
- Exhaust Gas Temperature Sensor Bank 2 Sensor 3 circuit poor electrical connection
- Exhaust leaks
- Excessive particulate matter buildup on sensor
How to Fix the DTC P247E GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P247E GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P247E GMC code?
Need more information on how to fix the P247E GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P247E GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P247E GMC Code
1. What are the common symptoms of OBDII code P247E GMC (Exhaust Gas Temperature Out of Range Bank 2 Sensor 3)?
- Common symptoms include decreased fuel efficiency, engine misfires, and the illumination of the Check Engine Light.
2. What are the possible causes of OBDII code P247E GMC?
- Potential causes include a faulty exhaust gas temperature sensor, wiring issues, exhaust system leaks, or a malfunctioning engine control module.
3. How can I diagnose OBDII code P247E GMC?
- Diagnosing this code typically involves using an OBDII scanner to retrieve the code, checking the exhaust gas temperature sensor and its wiring for damage, and inspecting the exhaust system for leaks.
4. What are the repair options for OBDII code P247E GMC?
- Repair options may include replacing the faulty exhaust gas temperature sensor, repairing any damaged wiring, fixing exhaust leaks, or reprogramming the engine control module.
5. Can I drive my vehicle with OBDII code P247E GMC?
- It is not recommended to drive the vehicle with this code present, as it can lead to engine performance issues and potential damage if left unresolved.
6. How serious is OBDII code P247E GMC?
- While this code may not always indicate a severe issue, it should be addressed promptly to prevent further damage to the engine or emissions system.
7. How much does it cost to repair OBDII code P247E GMC?
- Repair costs can vary depending on the exact cause of the code and the labor rates in your area, but it is advisable to budget for sensor replacement or potential exhaust system repairs.
8. Can I reset OBDII code P247E GMC on my own?
- You can attempt to clear the code using an OBDII scanner, but it is crucial to address the underlying issue causing the code to prevent it from returning.
9. Will OBDII code P247E GMC cause my vehicle to fail an emissions test?
- Yes, this code can cause your vehicle to fail an emissions test, so it is important to resolve the issue before undergoing any emissions testing.
10. How often does OBDII code P247E GMC occur in GMC vehicles?
- This code may occur sporadically in GMC vehicles with certain engine configurations, particularly those equipped with exhaust gas temperature sensors.
Discuss the causes and fixes for P247E GMC OBDII Code
Code P247E GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
