P247E Ford Code - Exhaust Gas Temperature Out of Range Bank 2 Sensor 3
Quick Answer
The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out of range high values. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 3, Exhaust Gas Temperature Sensor Bank 2 Sensor 3 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 3 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P247E Ford indicates Exhaust Gas Temperature Out of Range Bank 2 Sensor 3.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 3, Exhaust Gas Temperature Sensor Bank 2 Sensor 3 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 3 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P247E Ford Description
What are the Possible Causes of the DTC P247E Ford?
- Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 3
- Exhaust Gas Temperature Sensor Bank 2 Sensor 3 harness is open or shorted
- Exhaust Gas Temperature Sensor Bank 2 Sensor 3 circuit poor electrical connection
- Exhaust leaks
- Excessive particulate matter buildup on sensor
How to Fix the DTC P247E Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P247E Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P247E Ford code?
Need more information on how to fix the P247E Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P247E Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P247E Ford Code
1. What are the common symptoms of OBDII code P247E for a Ford vehicle?
Symptoms may include reduced engine performance, increased fuel consumption, illuminated Check Engine Light, and potential issues with the exhaust system.
2. What does the OBDII code P247E "Exhaust Gas Temperature Out of Range Bank 2 Sensor 3" mean for a Ford?
This code indicates that the exhaust gas temperature sensor in Bank 2 Sensor 3 is detecting a temperature reading outside of the expected range.
3. What are the possible causes of OBDII code P247E in a Ford?
Potential causes include a faulty exhaust gas temperature sensor, wiring issues, exhaust system leaks, sensor contamination, or problems with the engine control module.
4. How can I diagnose OBDII code P247E on my Ford?
Diagnosis typically involves using an OBDII scanner to retrieve the code, inspecting the exhaust gas temperature sensor and related wiring, and checking for any exhaust leaks or other issues in the system.
5. Can I continue driving my Ford with OBDII code P247E present?
It is not advisable to ignore the issue, as driving with this code can lead to further damage to the engine or emissions system. It is recommended to address the problem promptly.
6. How can I repair OBDII code P247E on my Ford?
Repair steps may include replacing the faulty exhaust gas temperature sensor, repairing any wiring issues, fixing exhaust leaks, and clearing the trouble code from the engine control module.
7. Are there any DIY tips for fixing OBDII code P247E in a Ford?
While some basic diagnostics can be done by DIY enthusiasts, it is recommended to have a professional technician diagnose and repair this code to ensure proper resolution.
8. How much does it typically cost to fix OBDII code P247E on a Ford?
The cost of repairs can vary depending on the exact cause of the code and the labor rates in your area. It is best to consult a mechanic for an accurate estimate.
9. Can a faulty exhaust gas temperature sensor cause other issues in a Ford vehicle?
Yes, a malfunctioning exhaust gas temperature sensor can impact engine performance, fuel efficiency, emissions, and overall drivability of the vehicle.
10. Are there any recalls or technical service bulletins related to OBDII code P247E in Ford vehicles?
It is recommended to check with Ford dealerships or online resources for any recalls or technical service bulletins related to this specific OBDII code to see if any relevant information is available.
Discuss the causes and fixes for P247E Ford OBDII Code
Code P247E Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
