P247E Dodge Code - Exhaust Gas Temperature Out of Range Bank 2 Sensor 3
Quick Answer
The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out of range high values. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 3, Exhaust Gas Temperature Sensor Bank 2 Sensor 3 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 3 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P247E Dodge indicates Exhaust Gas Temperature Out of Range Bank 2 Sensor 3.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 3, Exhaust Gas Temperature Sensor Bank 2 Sensor 3 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 3 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P247E Dodge Description
What are the Possible Causes of the DTC P247E Dodge?
- Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 3
- Exhaust Gas Temperature Sensor Bank 2 Sensor 3 harness is open or shorted
- Exhaust Gas Temperature Sensor Bank 2 Sensor 3 circuit poor electrical connection
- Exhaust leaks
- Excessive particulate matter buildup on sensor
How to Fix the DTC P247E Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P247E Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P247E Dodge code?
Need more information on how to fix the P247E Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P247E Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P247E Dodge Code
1. What are the common symptoms of OBDII code P247E in a Dodge, indicating Exhaust Gas Temperature Out of Range Bank 2 Sensor 3?
- Common symptoms include reduced engine performance, increased fuel consumption, and a possible check engine light.
2. What are the possible causes of OBDII code P247E in a Dodge related to Bank 2 Sensor 3?
- Possible causes include a faulty exhaust gas temperature sensor, wiring issues, exhaust leaks, or problems with the engine's air-fuel mixture.
3. How can I diagnose the issue causing OBDII code P247E in my Dodge?
- Diagnose the issue by using an OBDII scanner to read the code, inspecting the exhaust gas temperature sensor, checking for wiring damage, and ensuring the exhaust system is intact.
4. Can I continue driving my Dodge with OBDII code P247E present?
- It is not recommended to continue driving with this code present, as it can lead to potential engine damage and decreased fuel efficiency.
5. What is the typical repair process for addressing OBDII code P247E in a Dodge?
- The typical repair process involves replacing the faulty exhaust gas temperature sensor, repairing any damaged wiring, fixing exhaust leaks, and resetting the trouble code.
6. Are there any DIY tips for troubleshooting OBDII code P247E in a Dodge?
- DIY tips include checking the sensor connections, inspecting the sensor for physical damage, and ensuring proper grounding of the sensor.
7. How much does it cost to repair OBDII code P247E in a Dodge at a professional auto repair shop?
- The cost of repair can vary depending on the exact cause of the issue, but it typically ranges from $200 to $500, including parts and labor.
8. Can a clogged DPF (Diesel Particulate Filter) cause OBDII code P247E in a Dodge?
- Yes, a clogged DPF can cause this code by affecting the exhaust gas temperature readings, leading to the sensor detecting an out-of-range condition.
9. Is it necessary to clear the trouble code after repairing OBDII code P247E in a Dodge?
- Yes, it is important to clear the trouble code using an OBDII scanner after repairing the issue to ensure the system resets and monitors the sensor properly.
10. How can I prevent OBDII code P247E from reoccurring in my Dodge after repair?
- To prevent the code from reoccurring, ensure regular maintenance of the exhaust system, use quality fuel, and address any engine performance issues promptly.
Discuss the causes and fixes for P247E Dodge OBDII Code
Code P247E Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
