P247A Dodge Code - Exhaust Gas Temperature Out of Range Bank 1 Sensor 3
Quick Answer
The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out of range high values. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 1 Sensor 3, Exhaust Gas Temperature Sensor Bank 1 Sensor 3 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 1 Sensor 3 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P247A Dodge indicates Exhaust Gas Temperature Out of Range Bank 1 Sensor 3.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 1 Sensor 3, Exhaust Gas Temperature Sensor Bank 1 Sensor 3 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 1 Sensor 3 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P247A Dodge Description
What are the Possible Causes of the DTC P247A Dodge?
- Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 1 Sensor 3
- Exhaust Gas Temperature Sensor Bank 1 Sensor 3 harness is open or shorted
- Exhaust Gas Temperature Sensor Bank 1 Sensor 3 circuit poor electrical connection
- Exhaust leaks
- Excessive particulate matter buildup on sensor
How to Fix the DTC P247A Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P247A Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P247A Dodge code?
Need more information on how to fix the P247A Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P247A Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P247A Dodge Code
What does the OBDII code P247A mean?
The code P247A indicates that the Exhaust Gas Temperature (EGT) sensor for Bank 1, Sensor 3, is reporting a temperature that is outside the expected range.
What symptoms might I experience with a P247A code?
Common symptoms include illuminated check engine light, reduced engine performance, increased emissions, and potential issues with the vehicle's exhaust system.
What causes the P247A code to trigger?
The code can be triggered by a faulty EGT sensor, wiring issues, exhaust leaks, or problems with the engine control module (ECM) that affect sensor readings.
How can I diagnose the issue related to the P247A code?
To diagnose the issue, check the EGT sensor and its wiring for damage, verify the sensor's resistance with a multimeter, and inspect for exhaust leaks near the sensor.
What are the potential fixes for a P247A code?
Potential fixes include replacing the faulty EGT sensor, repairing damaged wiring, fixing exhaust leaks, or reprogramming or replacing the ECM if it’s determined to be faulty.
Can I drive my vehicle with a P247A code?
While it may be possible to drive the vehicle, it is not recommended as it can lead to further damage or increased emissions. It’s best to address the issue promptly.
How do I clear the P247A code after repairs?
You can clear the code using an OBDII scanner, or by disconnecting the vehicle's battery for a short period. However, ensure that the underlying issue has been resolved first.
Is the P247A code serious?
Yes, the P247A code can indicate issues that may affect engine performance and emissions. It’s advisable to address it to avoid potential damage and ensure compliance with emissions regulations.
What is the location of Bank 1, Sensor 3 in a Dodge vehicle?
Bank 1 typically refers to the side of the engine with the first cylinder, and Sensor 3 is usually located downstream of the turbocharger or after the catalytic converter in the exhaust system.
Will a P247A code cause my vehicle to fail an emissions test?
Yes, since the code indicates an issue with the exhaust system, it could cause your vehicle to fail an emissions test due to increased emissions or improper exhaust temperature readings.
Discuss the causes and fixes for P247A Dodge OBDII Code
Code P247A Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
