AutoCodes – Ford – P2473 Ford

P2473 Ford Code - Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 4

Quick Answer

The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out of range high values. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 4, Exhaust Gas Temperature Sensor Bank 2 Sensor 4 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 4 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P2473 Ford indicates Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 4.
Common causes: Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 4, Exhaust Gas Temperature Sensor Bank 2 Sensor 4 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 2 Sensor 4 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,305

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 15, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2473 Ford Description

The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out of range high values. The EGTS is located in front of the Diesel Oxidation Catalyst (DOC) and/or in front of the Diesel Particulate Filter (DPF). The EGTS detects exhaust gas temperature and converts it into a voltage and feeds back to the PCM with the voltage signal in order to control engine conditions to effectively reduce emissions. The PCM sets the P2473 OBDII code when the Exhaust Gas Temperature Sensor is out of factory specifications.

OBDII Code P2473 Ford - Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 4 - AutoCodes.com — P2473 Ford Code - Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 4

What does this mean?

What are the Possible Causes of the DTC P2473 Ford?

Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 2 Sensor 4
Exhaust Gas Temperature Sensor Bank 2 Sensor 4 harness is open or shorted
Exhaust Gas Temperature Sensor Bank 2 Sensor 4 circuit poor electrical connection
Exhaust leaks
Excessive particulate matter buildup on sensor

How to Fix the DTC P2473 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2473 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2473 Ford code?

Need more information on how to fix the P2473 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2473 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2473 Ford Code

1. What are common symptoms of OBDII code P2473 in a Ford vehicle?

- Common symptoms include poor engine performance, reduced fuel efficiency, and potential illumination of the Check Engine Light.

2. What does the OBDII code P2473 Ford mean?

- The code P2473 indicates a problem with the Exhaust Gas Temperature Sensor Circuit on Bank 2 Sensor 4 in a Ford vehicle.

3. What are possible causes of OBDII code P2473 in a Ford vehicle?

- Possible causes may include a faulty exhaust gas temperature sensor, damaged wiring or connectors, or issues with the sensor circuit itself.

4. How can I diagnose the OBDII code P2473 in my Ford vehicle?

- Diagnosing the code may involve conducting a visual inspection of the sensor and its connections, using a multimeter to test for continuity, and performing a scan tool analysis.

5. Can I still drive my Ford vehicle with the OBDII code P2473 present?

- It is not recommended to drive your vehicle with the code active, as it can lead to further damage and potential safety hazards.

6. How can I repair OBDII code P2473 in my Ford vehicle?

- Repairing the code may involve replacing the faulty exhaust gas temperature sensor, repairing or replacing damaged wiring or connectors, and clearing the code with a scan tool.

7. Are there any DIY tips for fixing OBDII code P2473 in a Ford vehicle?

- DIY tips may include checking for loose or damaged connections, ensuring proper mounting of the sensor, and following manufacturer repair procedures.

8. Is it necessary to reset the ECU after repairing OBDII code P2473 in a Ford vehicle?

- Yes, it is recommended to reset the ECU after repairing the code to clear the fault memory and ensure proper functioning of the system.

9. How can I prevent OBDII code P2473 from recurring in my Ford vehicle?

- Regular maintenance, timely sensor inspections, and addressing any underlying issues promptly can help prevent the code from recurring.

10. Can OBDII code P2473 in a Ford vehicle cause any long-term damage if left untreated?

- Leaving the code untreated can potentially lead to damage to the catalytic converter, decreased engine efficiency, and other costly repairs over time.