P2472 Ford Code - Exhaust Gas Temperature Sensor Circuit Intermittent/Erratic Bank 1 Sensor 4
Quick Answer
The Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out of range high values. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 1 Sensor 4, Exhaust Gas Temperature Sensor Bank 1 Sensor 4 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 1 Sensor 4 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2472 Ford indicates Exhaust Gas Temperature Sensor Circuit Intermittent/Erratic Bank 1 Sensor 4.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 1 Sensor 4, Exhaust Gas Temperature Sensor Bank 1 Sensor 4 harness is open or shorted, Exhaust Gas Temperature Sensor Bank 1 Sensor 4 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P2472 Ford Description
What are the Possible Causes of the DTC P2472 Ford?
- Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 1 Sensor 4
- Exhaust Gas Temperature Sensor Bank 1 Sensor 4 harness is open or shorted
- Exhaust Gas Temperature Sensor Bank 1 Sensor 4 circuit poor electrical connection
- Exhaust leaks
- Excessive particulate matter buildup on sensor
How to Fix the DTC P2472 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2472 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2472 Ford code?
Need more information on how to fix the P2472 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2472 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2472 Ford Code
1. What are the common symptoms of OBDII code P2472 in a Ford vehicle?
- Common symptoms include poor engine performance, reduced fuel efficiency, and the illumination of the Check Engine Light.
2. What are the possible causes of OBDII code P2472 in a Ford vehicle?
- The code P2472 may be triggered by a faulty exhaust gas temperature sensor, wiring issues, a damaged sensor connector, or an ECM/PCM problem.
3. How can I diagnose the cause of OBDII code P2472 in my Ford vehicle?
- Diagnose the code by visually inspecting the sensor and its wiring, checking for corrosion or damage, testing the sensor resistance, and verifying proper sensor operation.
4. Can I continue driving my Ford vehicle with OBDII code P2472 present?
- It is not recommended to continue driving with the code present, as it can lead to further engine damage and potential safety hazards.
5. How do I repair OBDII code P2472 in my Ford vehicle?
- Repair involves replacing the faulty exhaust gas temperature sensor, repairing or replacing damaged wiring, ensuring proper sensor connections, and clearing the code with a diagnostic tool.
6. Is it possible to reset OBDII code P2472 without fixing the underlying issue?
- Resetting the code without addressing the underlying issue may temporarily turn off the Check Engine Light, but the problem will persist and likely trigger the code again.
7. How much does it cost to fix OBDII code P2472 in a Ford vehicle?
- The cost of fixing OBDII code P2472 can vary depending on the exact cause of the issue, but it typically involves the cost of a new sensor and any necessary repairs to the wiring.
8. Can a DIY enthusiast repair OBDII code P2472 in a Ford vehicle?
- DIY repairs for OBDII code P2472 are possible for those with automotive repair experience and the necessary tools. However, seeking professional assistance is recommended for accurate diagnosis and repair.
9. Will OBDII code P2472 cause my Ford vehicle to fail an emissions test?
- Yes, OBDII code P2472 can cause your Ford vehicle to fail an emissions test due to the impact on exhaust gas temperature sensor functionality and emissions control.
10. How can I prevent OBDII code P2472 from occurring in my Ford vehicle?
- To prevent OBDII code P2472, it is important to perform regular vehicle maintenance, address any sensor issues promptly, and ensure proper care of the exhaust system components.
Discuss the causes and fixes for P2472 Ford OBDII Code
Code P2472 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
