P246B Ford Code - Vehicle Conditions Incorrect for Diesel Particulate Filter Regeneration
Quick Answer
The Powertrain Control Module (PCM) monitors the conditions necessary for diesel particulate filter regeneration. Common causes include Fuel system concerns, Turbocharger system concern, Exhaust leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P246B Ford indicates Vehicle Conditions Incorrect for Diesel Particulate Filter Regeneration.
- Common causes
- Common causes include Fuel system concerns, Turbocharger system concern, Exhaust leaks.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P246B Ford Description
What are the Possible Causes of the DTC P246B Ford?
- Fuel system concerns
- Turbocharger system concern
- Exhaust leaks
- Oxidation catalytic converter (OC)
- Aftermarket exhaust accessories or performance modifications
How to Fix the DTC P246B Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P246B Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P246B Ford code?
Need more information on how to fix the P246B Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P246B Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P246B Ford Code
1. What are the common symptoms of OBDII code P246B in a Ford vehicle?
- Common symptoms include reduced engine power, poor fuel economy, and the illumination of the check engine light.
2. What does the OBDII code P246B indicate in a Ford vehicle?
- The code P246B indicates that the vehicle conditions are incorrect for diesel particulate filter regeneration to occur.
3. What are the possible causes of OBDII code P246B in a Ford vehicle?
- Possible causes include a faulty diesel particulate filter, sensor issues, exhaust system leaks, or software glitches.
4. How can I diagnose the OBDII code P246B in my Ford vehicle?
- Diagnosing the code may involve inspecting the diesel particulate filter, checking sensor readings, and conducting a thorough examination of the exhaust system.
5. Can driving habits affect the occurrence of OBDII code P246B in a Ford vehicle?
- Yes, frequent short trips or low-speed driving can prevent the diesel particulate filter from reaching the necessary temperature for regeneration, triggering the code.
6. What are some tips for repairing OBDII code P246B in a Ford vehicle?
- Repair tips may include performing a forced regeneration of the diesel particulate filter, replacing faulty sensors, fixing exhaust leaks, or updating the vehicle's software.
7. Is it safe to continue driving with OBDII code P246B illuminated in a Ford vehicle?
- It is not recommended to ignore the code and continue driving, as it can lead to further damage to the diesel particulate filter and potentially affect the vehicle's performance.
8. How much does it typically cost to repair OBDII code P246B in a Ford vehicle?
- The cost of repair can vary depending on the specific issue causing the code, but it may range from a few hundred to a few thousand dollars, including parts and labor.
9. Can OBDII code P246B be reset without addressing the underlying issue in a Ford vehicle?
- While the code can be cleared temporarily, it is important to address the root cause to prevent the code from reoccurring and potentially causing more severe problems.
10. Are there any preventive measures to avoid OBDII code P246B in a Ford vehicle?
- Regularly driving at highway speeds, maintaining the vehicle properly, using quality fuel, and following the manufacturer's recommended maintenance schedule can help prevent the occurrence of the code.
Discuss the causes and fixes for P246B Ford OBDII Code
Code P246B Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
