P245F Dodge Code - Diesel Particulate Filter Pressure Sensor 'B' Circuit Range/Performance
Quick Answer
The Powertrain Control Module (PCM) monitors the rationality of the Diesel Particulate Filter (DPF) pressure sensor during idle and part load operating conditions. Common causes include Faulty Diesel Particulate Filter (DPF) Pressure Sensor, Diesel Particulate Filter (DPF) Pressure Sensor harness is open or shorted, Diesel Particulate Filter (DPF) Pressure Sensor circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P245F Dodge indicates Diesel Particulate Filter Pressure Sensor 'B' Circuit Range/Performance.
- Common causes
- Common causes include Faulty Diesel Particulate Filter (DPF) Pressure Sensor, Diesel Particulate Filter (DPF) Pressure Sensor harness is open or shorted, Diesel Particulate Filter (DPF) Pressure Sensor circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P245F Dodge Description
What are the Possible Causes of the DTC P245F Dodge?
- Faulty Diesel Particulate Filter (DPF) Pressure Sensor
- Diesel Particulate Filter (DPF) Pressure Sensor harness is open or shorted
- Diesel Particulate Filter (DPF) Pressure Sensor circuit poor electrical connection
- Diesel particulate filter pressure sensor connecting hose is loose, cracked, or missing
- Diesel particulate filter pressure sensor connecting hose port is cracked or broken
- Excessive amount of soot or ash in the diesel particulate filter
How to Fix the DTC P245F Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P245F Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P245F Dodge code?
Need more information on how to fix the P245F Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P245F Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P245F Dodge Code
1. What are the common symptoms of OBDII code P245F in a Dodge related to the Diesel Particulate Filter Pressure Sensor 'B' Circuit Range/Performance issue?
- Common symptoms include reduced engine power, decreased fuel efficiency, black smoke coming from the exhaust, and the illumination of the check engine light.
2. What are the possible causes of OBDII code P245F in a Dodge concerning the Diesel Particulate Filter Pressure Sensor 'B' Circuit Range/Performance problem?
- Possible causes can include a faulty diesel particulate filter pressure sensor, damaged wiring or connectors in the sensor circuit, issues with the diesel particulate filter itself, or a problem with the engine control module.
3. How can I diagnose the Diesel Particulate Filter Pressure Sensor 'B' Circuit Range/Performance issue in my Dodge when OBDII code P245F is triggered?
- You can diagnose the issue by using a diagnostic scanner to read the code, inspecting the sensor and its wiring for any visible damage, and performing a DPF pressure sensor test to determine if the sensor is functioning properly.
4. What are some repair tips for resolving the Diesel Particulate Filter Pressure Sensor 'B' Circuit Range/Performance problem in a Dodge with OBDII code P245F?
- Repair tips may include replacing the diesel particulate filter pressure sensor, repairing or replacing damaged wiring or connectors, cleaning or replacing the diesel particulate filter, and resetting the engine control module.
5. Can driving with OBDII code P245F related to the Diesel Particulate Filter Pressure Sensor 'B' Circuit Range/Performance issue in a Dodge cause further damage to the vehicle?
- Continuing to drive with this issue may lead to increased emissions, reduced engine performance, and potential damage to the diesel particulate filter system over time.
6. How much does it typically cost to repair the Diesel Particulate Filter Pressure Sensor 'B' Circuit Range/Performance problem in a Dodge when OBDII code P245F is present?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from $200 to $600, including parts and labor.
7. Are there any preventive maintenance measures that can help avoid triggering OBDII code P245F in a Dodge due to the Diesel Particulate Filter Pressure Sensor 'B' Circuit Range/Performance issue?
- Regularly servicing the diesel particulate filter system, checking the sensor and its wiring for any signs of wear, and using high-quality diesel fuel can help prevent this issue from occurring.
Discuss the causes and fixes for P245F Dodge OBDII Code
Code P245F Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
