AutoCodes – Ford – P2448 2006 Ford Fusion

P2448 2006 Ford Fusion Code - Secondary Air Injection System High Air Flow Bank 1

Quick Answer

For 20 seconds following a vehicle cold start, the air injection system delivers a controlled amount of outside air into the exhaust system, upstream of the catalytic converter, in order to help reduce hydrocarbon and carbon monoxide gas emissions. Common causes include AIR outlet hose leak, AIR outlet hose is disconnected. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2448 2006 Ford Fusion indicates Secondary Air Injection System High Air Flow Bank 1.
Common causes: Common causes include AIR outlet hose leak, AIR outlet hose is disconnected.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,861

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2448 2006 Ford Fusion Description

For 20 seconds following a vehicle cold start, the air injection system delivers a controlled amount of outside air into the exhaust system, upstream of the catalytic converter, in order to help reduce hydrocarbon and carbon monoxide gas emissions. The P2448 code is set when the AIR system detects excessive mass air flow change with the pump on and a rich exhaust system air fuel ratio.

OBDII Code P2448 2006 Ford Fusion - Secondary Air Injection System High Air Flow Bank 1 - AutoCodes.com — P2448 2006 Ford Fusion Code - Secondary Air Injection System High Air Flow Bank 1

What does this mean?

What are the Possible Causes of the DTC P2448 2006 Ford Fusion?

AIR outlet hose leak.
AIR outlet hose is disconnected.

How to Fix the DTC P2448 2006 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2448 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2448 2006 Ford Fusion code?

Need more information on how to fix the P2448 2006 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2448 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2448 2006 Ford Fusion Code

What does OBDII code P2448 mean for a 2006 Ford Fusion?

OBDII code P2448 indicates that there is a high air flow detected in the Secondary Air Injection System for Bank 1, which is responsible for reducing emissions during cold starts.

What are the common symptoms of code P2448 in a 2006 Ford Fusion?

Common symptoms include a check engine light, rough idling, reduced engine performance, and increased emissions during a cold start.

What could cause the P2448 code to trigger in a 2006 Ford Fusion?

Possible causes include a malfunctioning secondary air injection pump, a stuck open air bypass valve, a vacuum leak in the system, or an electrical issue such as a faulty sensor or wiring.

How can I diagnose the issue related to the P2448 code?

Start by visually inspecting the secondary air injection system for leaks or damage, check the operation of the air pump and valves, and use a scan tool to monitor live data for any irregularities.

What repairs are typically needed to fix code P2448?

Repairs may involve replacing the secondary air injection pump, fixing or replacing the air bypass valve, repairing vacuum leaks, or addressing any electrical issues like faulty connectors or wiring.

Can I drive my 2006 Ford Fusion with code P2448?

While it may be drivable, it's advisable to address the issue promptly as it can lead to increased emissions and potential damage to the engine or exhaust system over time.

Is there a way to temporarily clear the P2448 code?

You can clear the code using an OBDII scanner, but this is only a temporary solution. The underlying issue must be fixed to prevent the code from reappearing.

Will fixing code P2448 improve fuel efficiency?

Yes, repairing the secondary air injection system can improve fuel efficiency by ensuring the engine runs optimally and emissions are reduced during cold starts.

How much does it typically cost to repair the P2448 code?

Repair costs can vary widely depending on the underlying issue but can range from $100 to $500 or more, depending on whether parts need to be replaced or if there are more extensive repairs needed.