P2437 Buick Code - Secondary Air Injection System Pressure Sensor Circuit Low Voltage Bank 2
Quick Answer
The secondary air injection system aids in the reduction of hydrocarbon emissions during a cold start. Common causes include Faulty Secondary Air Injection System Pressure Sensor, Secondary Air Injection System Pressure Sensor harness is open or shorted, Secondary Air Injection System Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2437 Buick indicates Secondary Air Injection System Pressure Sensor Circuit Low Voltage Bank 2.
- Common causes
- Common causes include Faulty Secondary Air Injection System Pressure Sensor, Secondary Air Injection System Pressure Sensor harness is open or shorted, Secondary Air Injection System Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2437 Buick Description
The Diagnostic Trouble Code (DTC) will set when the ECM detects that the corresponding bank 2 secondary air injection pressure sensor signal is out of specifications.
What are the Possible Causes of the DTC P2437 Buick?
- Faulty Secondary Air Injection System Pressure Sensor
- Secondary Air Injection System Pressure Sensor harness is open or shorted
- Secondary Air Injection System Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2437 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2437 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2437 Buick code?
Need more information on how to fix the P2437 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2437 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2437 Buick Code
1. What are the common symptoms of OBDII code P2437 in a Buick related to the Secondary Air Injection System Pressure Sensor Circuit Low Voltage Bank 2?
- Common symptoms include engine hesitation, rough idling, reduced fuel efficiency, and the illumination of the Check Engine Light.
2. What are the possible causes of OBDII code P2437 in a Buick?
- Possible causes include a faulty secondary air injection pump, damaged wiring or connectors, a defective pressure sensor, or a problem with the air injection system's operation.
3. How does the Secondary Air Injection System work in a Buick, and why is it important?
- The Secondary Air Injection System helps reduce emissions by introducing fresh air into the exhaust system to aid in the combustion of unburned fuel. It is essential for meeting emission standards.
4. How can I diagnose OBDII code P2437 in my Buick at home?
- You can diagnose the issue by checking the wiring and connectors for damage, testing the secondary air injection pump, and verifying the pressure sensor's functionality using a multimeter.
5. What are some repair tips for addressing OBDII code P2437 in a Buick?
- Repair tips include checking and repairing any damaged wiring, replacing a faulty secondary air injection pump or pressure sensor, and ensuring proper operation of the air injection system components.
6. Can OBDII code P2437 in a Buick cause further damage if left untreated?
- Yes, leaving OBDII code P2437 untreated can lead to increased emissions, reduced engine performance, and potential damage to the catalytic converter over time.
7. Is it safe to continue driving my Buick with OBDII code P2437 present?
- It is generally not recommended to continue driving your Buick with OBDII code P2437 present, as it can lead to engine performance issues and potential damage to emission control components.
8. How much does it typically cost to repair OBDII code P2437 in a Buick?
- The cost of repairing OBDII code P2437 can vary depending on the exact cause of the issue, but it may range from $200 to $600 or more, including parts and labor.
9. Can resetting the Check Engine Light make OBDII code P2437 go away temporarily?
- Resetting the Check Engine Light may temporarily turn off the warning indicator, but it will not fix the underlying issue causing OBDII code P2437 in your Buick.
10. Will OBDII code P2437 in a Buick pass a state emissions test?
- No, a Buick with OBDII code P2437 will likely fail a state emissions test due to increased emissions and improper operation of the secondary air injection system.
Discuss the causes and fixes for P2437 Buick OBDII Code
Code P2437 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
