P2428 FORD - Exhaust Gas Temperature Too High Bank 1
P2428 FORD Possible Causes
- Faulty Exhaust Gas Temperature (EGT)
- Exhaust Gas Temperature (EGT) harness is open or shorted
- Exhaust Gas Temperature (EGT) circuit poor electrical connection
- Extreme changes in ambient temperature soon after key ON, engine running
First diagnose P2428 FORD code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
Cost of diagnosing the P2428 FORD code
Labor: 1.0The cost of diagnosing the P2428 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
P2428 FORD Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2428 Ford DescriptionThe Powertrain Control Module (PCM) monitors the Exhaust Gas Temperature (EGT) sensor for a biased signal value. Following an 8-hour soak, the PCM records the EGT sensor temperature value at key ON, engine OFF. After several minutes of vehicle operation at vehicle speeds greater than 40.2 km/h (25 mph) the PCM calculates an expected key ON, engine OFF value. The PCM determines what the expected EGT value at key ON, engine OFF should have been based on inputs from other sensors. The test fails when the difference between the expected calculated value and the actual recorded value is greater than 40°C (72°F).
P2428 FORD More InformationNeed more information on how to fix the P2428 FORD code?
Get Access to Factory Service Manuals
Need more help?Get the P2428 Ford code diagnosed by a professional: Find a repair shop in your area
P2428 FORD CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2428 Ford code? Have you replaced any parts?
Any information is appreciated. Thanks