P2424 2008 Nissan Rogue Code - HC Adsorption Catalyst Efficiency Below Threshold Bank 2
Quick Answer
The Engine Control Module (ECM) monitors the phase gap between the heated oxygen sensor 2 signal and the heated oxygen sensor 3 signal. Common causes include HC adsorption catalyst (under floor), Exhaust tube, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2424 2008 Nissan Rogue indicates HC Adsorption Catalyst Efficiency Below Threshold Bank 2.
- Common causes
- Common causes include HC adsorption catalyst (under floor), Exhaust tube, Intake air leaks.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2424 2008 Nissan Rogue Description
The phase gap between the heated oxygen sensor 2 signal and the heated oxygen sensor 3 signal becomes small as the Hydrocarbon (HC) adsorption catalyst (underfloor) deteriorates.
When the phase gap between the heated oxygen sensor 2 signal and the heated oxygen sensor 3 signal approaches a specified limit value, the HC adsorption catalyst (underfloor) malfunction is diagnosed.
What are the Possible Causes of the DTC P2424 2008 Nissan Rogue?
- HC adsorption catalyst (under floor)
- Exhaust tube
- Intake air leaks
- Faulty Fuel injector
- Fuel injector leaks
- Faulty Spark plug
- Improper ignition timing
How to Fix the DTC P2424 2008 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2424 2008 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2424 2008 Nissan Rogue code?
Need more information on how to fix the P2424 2008 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2424 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2424 2008 Nissan Rogue Code
1. What are the common symptoms of OBDII code P2424 in a 2008 Nissan Rogue?
- Common symptoms include the Check Engine light illuminating on the dashboard, decreased fuel efficiency, and possible rough idling.
2. What does the OBDII code P2424 in a 2008 Nissan Rogue indicate?
- The code P2424 indicates that the hydrocarbon (HC) adsorption catalyst efficiency has fallen below the threshold on Bank 2 of the vehicle.
3. What are the potential causes of OBDII code P2424 in a 2008 Nissan Rogue?
- Potential causes include a faulty HC adsorption catalyst, a damaged Bank 2 sensor, exhaust leaks, or issues with the engine's air-fuel ratio.
4. How can I diagnose OBDII code P2424 in my 2008 Nissan Rogue?
- Diagnosing the code typically involves using an OBDII scanner to retrieve the specific fault code, inspecting the HC adsorption catalyst and related components, and checking for any exhaust leaks.
5. Can I still drive my 2008 Nissan Rogue with OBDII code P2424?
- It is generally not recommended to drive the vehicle extensively with this code present, as it can lead to further damage and potentially affect the vehicle's performance.
6. How can I repair OBDII code P2424 in my 2008 Nissan Rogue?
- Repair options may include replacing the HC adsorption catalyst, repairing any exhaust leaks, replacing faulty sensors, or addressing issues with the air-fuel ratio.
7. Is it possible to reset the OBDII code P2424 in a 2008 Nissan Rogue?
- While you can clear the code with an OBDII scanner, it is crucial to address the underlying issue causing the code to prevent it from reoccurring.
8. How much does it cost to fix OBDII code P2424 in a 2008 Nissan Rogue?
- The cost of repair can vary depending on the specific cause of the code and the extent of the damage, but it may range from a few hundred to over a thousand dollars.
9. Can a DIY enthusiast fix OBDII code P2424 in a 2008 Nissan Rogue?
- Some repairs related to this code may be tackled by experienced DIY enthusiasts, but it is recommended to consult a professional mechanic for a proper diagnosis and repair.
10. How often does OBDII code P2424 occur in a 2008 Nissan Rogue?
- The occurrence of this specific code can vary, but it is relatively uncommon compared to other more frequently encountered OBDII codes in vehicles.
Discuss the causes and fixes for P2424 2008 Nissan Rogue OBDII Code
Code P2424 2008 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
