P2423 Scion Code - HC Adsorption Catalyst Efficiency Below Threshold Bank 1
Quick Answer
Hydrocarbon Absorptive Catalyst (HCAC) system consists of the Three-way Catalyst (TWC) and two heated oxygen sensors. Common causes include Faulty Hydrocarbon Absorptive Catalyst (HCAC), Exhaust tube, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2423 Scion indicates HC Adsorption Catalyst Efficiency Below Threshold Bank 1.
- Common causes
- Common causes include Faulty Hydrocarbon Absorptive Catalyst (HCAC), Exhaust tube, Intake air leaks.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2423 Scion Description
The ceramic portion of this catalyst is coated with the HC adsorbent* material. The TWC material is coated on top of the HC adsorption layer.
While "active air-fuel ratio control" for detecting the front catalyst deterioration is performed, the Engine Control Module (ECM) determines if the rear catalyst has deteriorated as well.
The ECM compares the waveforms of the heated oxygen sensors located before and after the rear catalyst to determine if the catalyst capacity has deteriorated.
If the catalyst is functioning normally, the waveform of the heated oxygen sensor 3 indicates RICH and LEAN alternation more slowly than the waveform of the heated oxygen sensor 2 located before the catalyst. If both waveform variation rates are similar, indicates that the catalyst capacity has deteriorated.
What are the Possible Causes of the DTC P2423 Scion?
- Faulty Hydrocarbon Absorptive Catalyst (HCAC)
- Exhaust tube
- Intake air leaks
- Faulty Fuel injector
- Fuel injector leaks
- Faulty Spark plug
- Improper ignition timing
How to Fix the DTC P2423 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2423 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2423 Scion code?
Need more information on how to fix the P2423 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2423 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2423 Scion Code
1. What are the common symptoms of OBDII code P2423 in a Scion?
The common symptoms of P2423 include the illumination of the check engine light, decreased fuel efficiency, rough engine performance, and potential misfires.
2. What does the OBDII code P2423 in a Scion indicate?
P2423 indicates that the hydrocarbon (HC) adsorption catalyst efficiency is below the threshold on bank 1 of the vehicle's exhaust system.
3. What are the possible causes of OBDII code P2423 in a Scion?
Possible causes of P2423 include a faulty HC adsorption catalyst, a malfunctioning oxygen sensor, exhaust leaks, damaged wiring, or issues with the engine control module (ECM).
4. How serious is OBDII code P2423 in a Scion?
While P2423 may not cause immediate drivability issues, it is important to address it promptly to prevent potential damage to the catalytic converter and ensure optimal engine performance.
5. Can I continue driving my Scion with OBDII code P2423?
It is generally safe to drive your Scion with the P2423 code, but it is recommended to have the issue diagnosed and repaired as soon as possible to prevent further complications.
6. How can I diagnose OBDII code P2423 in my Scion?
Diagnosing P2423 typically involves using an OBDII scanner to retrieve the code, conducting a visual inspection of the exhaust system, checking the oxygen sensor readings, and performing a smoke test to detect leaks.
7. How can I repair OBDII code P2423 in my Scion?
Repairing P2423 may involve replacing the HC adsorption catalyst, repairing any exhaust leaks, replacing the oxygen sensor, repairing damaged wiring, or reprogramming the ECM as needed.
8. Will resetting the check engine light clear OBDII code P2423 in my Scion?
Resetting the check engine light may temporarily clear the code, but if the underlying issue causing P2423 is not addressed, the code is likely to reappear.
9. How much does it cost to fix OBDII code P2423 in a Scion?
The cost of repairing P2423 can vary depending on the specific cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
10. How can I prevent OBDII code P2423 from recurring in my Scion?
To prevent the recurrence of P2423, it is essential to perform regular maintenance on your vehicle, address any engine issues promptly, and ensure proper functioning of the emissions control system.
Discuss the causes and fixes for P2423 Scion OBDII Code
Code P2423 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
