P2420 2006 Toyota Highlander Code - Evaporative Emission System Switching Valve Control Circuit High
Quick Answer
When 5 hours have elapsed after the ignition switch is turned OFF, the electric vacuum pump creates negative pressure (vacuum) in Evaporative Emission (EVAP) system. Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2420 2006 Toyota Highlander indicates Evaporative Emission System Switching Valve Control Circuit High.
- Common causes
- Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2420 2006 Toyota Highlander Description
What are the Possible Causes of the DTC P2420 2006 Toyota Highlander?
- Faulty Vacuum Pump Module
- Vacuum Pump Module harness is open or shorted
- Vacuum Pump Module circuit poor electrical connection.
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2420 2006 Toyota Highlander?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2420 2006 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2420 2006 Toyota Highlander code?
Need more information on how to fix the P2420 2006 Toyota Highlander code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2420 2006 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2420 2006 Toyota Highlander Code
1. What are some common symptoms of OBDII code P2420 on a 2006 Toyota Highlander?
- Common symptoms include the check engine light illuminating, rough idling, decreased fuel efficiency, and difficulty starting the vehicle.
2. What can cause the OBDII code P2420 to appear on a 2006 Toyota Highlander?
- The code P2420 is often triggered by a faulty evaporative emission system switching valve or a problem with the control circuit, such as wiring issues or a poor connection.
3. How can I diagnose the cause of OBDII code P2420 on my 2006 Toyota Highlander?
- Diagnosing the issue typically involves using an OBDII scanner to read the code, inspecting the switching valve and its wiring for damage, and testing the components for proper functioning.
4. Can I continue driving my 2006 Toyota Highlander with OBDII code P2420?
- It is not recommended to drive the vehicle with the code P2420 active, as it can lead to further damage to the emission control system and potentially affect the vehicle's performance.
5. How can I repair OBDII code P2420 on a 2006 Toyota Highlander?
- Repairing the code P2420 usually involves replacing the faulty evaporative emission system switching valve, repairing any damaged wiring or connectors, and clearing the code with an OBDII scanner.
6. Are there any DIY tips for fixing OBDII code P2420 on a 2006 Toyota Highlander?
- While some may attempt to replace the switching valve themselves, it is recommended to consult a professional mechanic for accurate diagnosis and repair to ensure the issue is properly addressed.
7. What is the function of the evaporative emission system switching valve in a 2006 Toyota Highlander?
- The switching valve controls the flow of fuel vapor from the fuel tank to the charcoal canister, helping to reduce emissions and maintain proper fuel system operation.
8. How much does it typically cost to repair OBDII code P2420 on a 2006 Toyota Highlander?
- The cost of repairing OBDII code P2420 can vary depending on the root cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Can a dirty fuel system cause OBDII code P2420 to appear on a 2006 Toyota Highlander?
- While a dirty fuel system can impact the vehicle's performance, the code P2420 specifically relates to issues with the evaporative emission system switching valve or its control circuit.
10. Is it important to address OBDII code P2420 promptly on a 2006 Toyota Highlander?
- Yes, addressing the code promptly is essential to prevent further damage to the emission control system and ensure the vehicle meets emissions standards for safe and efficient operation.
Discuss the causes and fixes for P2420 2006 Toyota Highlander OBDII Code
Code P2420 2006 Toyota Highlander comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
