AutoCodes – Generic – P2420

P2420 Code - Evaporative Emission System Switching Valve Control Circuit High

Quick Answer

When 5 hours have elapsed after the ignition switch is turned OFF, the electric vacuum pump creates negative pressure (vacuum) in Evaporative Emission (EVAP) system. Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2420 indicates Evaporative Emission System Switching Valve Control Circuit High.
Common causes
Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 24,470
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 11, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2420 Description

When 5 hours have elapsed after the ignition switch is turned OFF, the electric vacuum pump creates negative pressure (vacuum) in Evaporative Emission (EVAP) system. Then Engine Control Module (ECM) monitors for leaks and actuator malfunctions based on EVAP pressure. The ECM illuminates the MIL and sets a Diagnostic Trouble Code (DTC) if the difference in EVAP pressure in EVAP system pressure is small and does not increase more than 2.25 mmHg (0.3 kPa) within 10 seconds of changing the vent valve from OFF (vent) to ON (closed), the ECM determines that the vent valve is stuck OFF (vent).
OBDII Code P2420 - Evaporative Emission System Switching Valve Control Circuit High - AutoCodes.com
P2420 Code - Evaporative Emission System Switching Valve Control Circuit High

What are the Possible Causes of the DTC P2420?

  • Faulty Vacuum Pump Module
  • Vacuum Pump Module harness is open or shorted
  • Vacuum Pump Module circuit poor electrical connection.
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P2420?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2420 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2420 code?

Need more information on how to fix the P2420 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2420 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

  • P2420 Dodge β€” Evaporative Emission System Switching Valve Control Circuit High
  • P2420 Hyundai β€” DMTL Valve Short To Battery Voltage
  • P2420 KIA β€” DMTL Valve Short To Battery Voltage
  • P2420 Lexus β€” Evaporative Emission System Switching Valve Control Circuit High
  • P2420 Scion β€” Evaporative Emission System Switching Valve Control Circuit High
  • P2420 Toyota β€” Evaporative Emission System Switching Valve Control Circuit High
  • P2420 Volvo β€” Leak Diagnostic Unit Valve Signal Too High
About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2420 Code

No Frequently Asked Questions about P2420 Code found.

Discuss the causes and fixes for P2420 OBDII Code

  • Engine lights came on. I took it to Autozone to plug in the code reader. It notes P2320 Evap system switching valve control circuit high. Not sure what that means. Not sure if it's critical that I should not be driving my RX400h. Lexus just replace a completely new dash board for me over the weekend. Is that a problem?

  • The problem with the EVAP system will not cause any engine performance problems, but will cause your vehicle to fail the smog test.

  • i get this code 2420 for a Rav4 2008, any solution please

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play