P2419 LEXUS - Evaporative Emission System Switching Valve Control Circuit Low
- Faulty Vacuum Pump Module
- Vacuum Pump Module harness is open or shorted
- Vacuum Pump Module circuit poor electrical connection.
- Faulty Engine Control Module (ECM)
When is the code detected?To determine leak criterion (Reference pressure), vacuum pump creates negative pressure in canister pump module through 0.02 inch orifice and pressure is measured. If the conditions are not met, Engine Control Module (ECM) the code will be set.
- Engine Light ON (or Service Engine Soon Warning Light)
P2419 Lexus Description5 hours after the ignition switch is turned OFF, the leak detection pump creates negative pressure(vacuum) in the EVAP system. The Engine Control Module (ECM) monitors for leaks and actuator malfunctions based on the EVAP pressure. HINT: If the engine coolant temperature is not below 35°C (95°F) 5 hours after the ignition switch is turned OFF, the monitor check starts 2 hours later. If it is still not below 35°C (95°F) 7 hours after the ignition switch is turned OFF, the monitor check starts 2.5 hours later.
Need more help?Get the P2419 Lexus code diagnosed by a professional: Find a repair shop in your area
P2419 LEXUS CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2419 Lexus code? Have you replaced any parts?
Any information is appreciated. Thanks