P2419 2013 Toyota RAV4 Code - Evaporative Emission System Switching Valve Control Circuit Low
Quick Answer
5 hours after the ignition switch is turned off, the leak detection pump creates negative pressure (vacuum) in the Evaporative Emission (EVAP) system. Common causes include Faulty Canister Pump Module, Canister Pump Module harness is open or shorted, Canister Pump Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2419 2013 Toyota RAV4 indicates Evaporative Emission System Switching Valve Control Circuit Low.
- Common causes
- Common causes include Faulty Canister Pump Module, Canister Pump Module harness is open or shorted, Canister Pump Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2419 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC P2419 2013 Toyota RAV4?
- Faulty Canister Pump Module
- Canister Pump Module harness is open or shorted
- Canister Pump Module circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2419 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2419 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2419 2013 Toyota RAV4 code?
Need more information on how to fix the P2419 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2419 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2419 2013 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P2419 in a 2013 Toyota RAV4?
- Common symptoms include the Check Engine light illuminating, poor fuel economy, rough idling, and potential issues with the vehicle's emission system.
2. What causes the OBDII code P2419 in a 2013 Toyota RAV4?
- The code P2419 typically indicates a malfunction in the evaporative emission system switching valve control circuit, which can be caused by wiring issues, a faulty switching valve, or a problem with the engine control module (ECM).
3. How serious is the OBDII code P2419 in a 2013 Toyota RAV4?
- While the code may not cause immediate drivability issues, it is still important to address it promptly to ensure proper functioning of the vehicle's emission control system and avoid potential long-term damage.
4. Can I continue driving my 2013 Toyota RAV4 with the OBDII code P2419?
- It is generally safe to drive the vehicle for a short period with this code, but it is recommended to have the issue diagnosed and repaired as soon as possible to prevent further complications.
5. How can I diagnose the OBDII code P2419 in my 2013 Toyota RAV4?
- Diagnosing the code typically involves using an OBDII scanner to retrieve the code, checking the wiring and connections related to the evaporative emission system switching valve, and testing the switching valve itself for proper functionality.
6. What are some repair tips for fixing the OBDII code P2419 in a 2013 Toyota RAV4?
- Repair tips may include checking and repairing any damaged wiring or connections, replacing the switching valve if faulty, and resetting the ECM after completing the repairs.
7. How much does it cost to repair the OBDII code P2419 in a 2013 Toyota RAV4?
- The cost of repair can vary depending on the exact cause of the code and the labor rates in your area. It is recommended to consult with a qualified mechanic for an accurate estimate.
8. Can I reset the OBDII code P2419 in my 2013 Toyota RAV4 on my own?
- While you can clear the code using an OBDII scanner, it is important to address the underlying issue causing the code to prevent it from reoccurring. Simply clearing the code without fixing the problem may lead to further issues down the line.
9. Will the OBDII code P2419 cause my 2013 Toyota RAV4 to fail an emissions test?
- Yes, the presence of this code indicates a problem with the evaporative emission system, which can cause the vehicle to fail an emissions test. It is important to resolve the issue before undergoing an emissions test.
10. How can I prevent the OBDII code P2419 from appearing in my 2013 Toyota RAV4 in the future?
- Regular maintenance, including checking the condition of the emission system components and addressing any warning lights promptly, can help prevent the recurrence of the P2419 code in your Toyota RAV4.
Discuss the causes and fixes for P2419 2013 Toyota RAV4 OBDII Code
Code P2419 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
