AutoCodes – Toyota – P2419 2006 Toyota Prius

P2419 2006 Toyota Prius Code - Evaporative Emission System Switching Valve Control Circuit Low

Quick Answer

When 5 hours have elapsed after the ignition switch is turned OFF, the electric vacuum pump creates negative pressure (vacuum) in Evaporative Emission (EVAP) system. Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2419 2006 Toyota Prius indicates Evaporative Emission System Switching Valve Control Circuit Low.
Common causes
Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,754
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 11, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2419 2006 Toyota Prius Description

When 5 hours have elapsed after the ignition switch is turned OFF, the electric vacuum pump creates negative pressure (vacuum) in Evaporative Emission (EVAP) system. Then Engine Control Module (ECM) monitors for leaks and actuator malfunctions based on EVAP pressure. The ECM determines that the vent valve is stuck ON (closed) if 1) the pressure is higher than -7.5 mmHg (-1 kPa) or lower than -33.75 mmHg (-4.5 kPa), and 2) the EVAP system pressure does not stabilize for a duration of 60 seconds. The ECM illuminates the MIL and sets a Diagnostic Trouble Code (DTC).
OBDII Code P2419 2006 Toyota Prius - Evaporative Emission System Switching Valve Control Circuit Low - AutoCodes.com
P2419 2006 Toyota Prius Code - Evaporative Emission System Switching Valve Control Circuit Low

What are the Possible Causes of the DTC P2419 2006 Toyota Prius?

  • Faulty Vacuum Pump Module
  • Vacuum Pump Module harness is open or shorted
  • Vacuum Pump Module circuit poor electrical connection
  • EVAP system hose (clogged, cracked or broken)
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P2419 2006 Toyota Prius?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2419 2006 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2419 2006 Toyota Prius code?

Need more information on how to fix the P2419 2006 Toyota Prius code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2419 2006 Toyota Prius code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2419 2006 Toyota Prius Code

1. What are common symptoms of OBDII code P2419 in a 2006 Toyota Prius?

- Common symptoms include the Check Engine light illuminating, decreased fuel efficiency, and potential issues with the vehicle's emission control system.

2. What does the OBDII code P2419 in a 2006 Toyota Prius indicate?

- This code indicates a problem with the Evaporative Emission System Switching Valve Control Circuit being detected as low by the vehicle's onboard diagnostics system.

3. What are the possible causes of OBDII code P2419 in a 2006 Toyota Prius?

- Possible causes include a faulty evaporative emission system switching valve, damaged wiring or connectors in the circuit, or a problem with the engine control module.

4. How can I diagnose the cause of OBDII code P2419 in my 2006 Toyota Prius?

- Diagnosing this code typically involves performing a visual inspection of the switching valve and its connections, checking for any visible damage, and using a scan tool to analyze the circuit's voltage readings.

5. Is it safe to continue driving my 2006 Toyota Prius with OBDII code P2419 present?

- It is generally not recommended to continue driving with this code present, as it can lead to increased emissions and potentially cause further damage to the vehicle's emission control system.

6. Can I repair OBDII code P2419 in my 2006 Toyota Prius myself?

- While some DIY enthusiasts may attempt to repair this code themselves by replacing the switching valve or repairing the circuit, it is often recommended to have a professional diagnose and repair the issue to ensure proper resolution.

7. How much does it typically cost to repair OBDII code P2419 in a 2006 Toyota Prius?

- The cost of repairing this code can vary depending on the root cause of the issue, but it may range from $100 to $300 for parts and labor, excluding any diagnostic fees.

8. Are there any preventive maintenance tips to avoid OBDII code P2419 in a 2006 Toyota Prius?

- Regularly inspecting the emission control system components, ensuring proper gas cap sealing, and following the manufacturer's recommended maintenance schedule can help prevent issues leading to this code.

9. Can a bad gas cap cause OBDII code P2419 in a 2006 Toyota Prius?

- While a bad gas cap is not a direct cause of this specific code, it can contribute to overall emission system issues that may trigger related codes, so ensuring a properly sealed gas cap is important for emission system health.

10. Will resetting the Check Engine light resolve OBDII code P2419 in a 2006 Toyota Prius?

- Resetting the Check Engine light may temporarily clear the code, but it will not address the underlying issue causing the code to trigger. It is recommended to diagnose and repair the root cause to prevent further problems.

Discuss the causes and fixes for P2419 2006 Toyota Prius OBDII Code

Code P2419 2006 Toyota Prius comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play