AutoCodes – Toyota – P2419 2005 Toyota Highlander

P2419 2005 Toyota Highlander Code - Evaporative Emission System Switching Valve Control Circuit Low

Quick Answer

When 5 hours have elapsed after the ignition switch is turned OFF, the electric vacuum pump creates negative pressure (vacuum) in Evaporative Emission (EVAP) system. Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2419 2005 Toyota Highlander indicates Evaporative Emission System Switching Valve Control Circuit Low.
Common causes
Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,565
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 11, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2419 2005 Toyota Highlander Description

When 5 hours have elapsed after the ignition switch is turned OFF, the electric vacuum pump creates negative pressure (vacuum) in Evaporative Emission (EVAP) system. Then Engine Control Module (ECM) monitors for leaks and actuator malfunctions based on EVAP pressure. The ECM determines that the vent valve is stuck ON (closed) if 1) the pressure is higher than -7.5 mmHg (-1 kPa) or lower than -33.75 mmHg (-4.5 kPa), and 2) the EVAP system pressure does not stabilize for a duration of 60 seconds. The ECM illuminates the MIL and sets a Diagnostic Trouble Code (DTC).
OBDII Code P2419 2005 Toyota Highlander - Evaporative Emission System Switching Valve Control Circuit Low - AutoCodes.com
P2419 2005 Toyota Highlander Code - Evaporative Emission System Switching Valve Control Circuit Low

What are the Possible Causes of the DTC P2419 2005 Toyota Highlander?

  • Faulty Vacuum Pump Module
  • Vacuum Pump Module harness is open or shorted
  • Vacuum Pump Module circuit poor electrical connection.
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P2419 2005 Toyota Highlander?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2419 2005 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2419 2005 Toyota Highlander code?

Need more information on how to fix the P2419 2005 Toyota Highlander code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2419 2005 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2419 2005 Toyota Highlander Code

1. What are the common symptoms of OBDII code P2419 in a 2005 Toyota Highlander?

- Common symptoms include the Check Engine light illuminating on the dashboard, decreased fuel efficiency, and potential issues with the vehicle's emission control system.

2. What does the OBDII code P2419 for a 2005 Toyota Highlander mean?

- OBDII code P2419 indicates a problem with the Evaporative Emission System Switching Valve Control Circuit being detected as low by the vehicle's onboard diagnostic system.

3. What are the possible causes of OBDII code P2419 in a 2005 Toyota Highlander?

- Possible causes include a faulty switching valve, damaged wiring or connectors in the control circuit, a defective PCM (Powertrain Control Module), or a vacuum leak in the evaporative emission system.

4. How can I diagnose the issue causing OBDII code P2419 in my 2005 Toyota Highlander?

- Diagnosing the issue may involve visually inspecting the wiring and connectors, testing the switching valve for proper function, checking for vacuum leaks in the system, and using a scan tool to monitor data from the PCM.

5. Can I continue driving my 2005 Toyota Highlander with OBDII code P2419?

- It is not recommended to continue driving with the Check Engine light on, as unresolved emission control system issues can potentially lead to further damage and increased emissions.

6. How can I reset the OBDII code P2419 in my 2005 Toyota Highlander?

- You can reset the code using an OBDII scan tool, but it is essential to address and repair the underlying issue causing the code to prevent it from reoccurring.

7. Is it possible to repair OBDII code P2419 in a 2005 Toyota Highlander without professional help?

- While some DIY enthusiasts may be able to diagnose and repair simple issues causing the code, complex problems or component replacements may require professional assistance.

8. How much does it typically cost to repair OBDII code P2419 in a 2005 Toyota Highlander?

- Repair costs can vary depending on the exact cause of the issue, but they may range from a simple fix like replacing a faulty valve or connector to more expensive repairs involving the PCM or emission system components.

9. Will fixing OBDII code P2419 improve the performance of my 2005 Toyota Highlander?

- Resolving the issue causing the code can help restore optimal performance, fuel efficiency, and emission control system functionality in your Toyota Highlander.

10. How often should I have my 2005 Toyota Highlander's emission system inspected to prevent OBDII code P2419 and other related issues?

- It is recommended to follow the manufacturer's maintenance schedule and have the emission system inspected regularly to prevent and address potential issues before they trigger OBDII codes like P2419.

Discuss the causes and fixes for P2419 2005 Toyota Highlander OBDII Code

Code P2419 2005 Toyota Highlander comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play