AutoCodes – Dodge – P2416 Dodge

P2416 Dodge Code - O2 Sensor Signals Swapped Bank 1 Sensor 2/Bank 1 Sensor 3

Quick Answer

The Engine Control Module (ECM) monitor the Oxygen (O2) Sensor performance. Common causes include Faulty Oxygen (O2) Sensor, Oxygen (O2) harness is open or shorted, Oxygen (O2) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2416 Dodge indicates O2 Sensor Signals Swapped Bank 1 Sensor 2/Bank 1 Sensor 3.
Common causes
Common causes include Faulty Oxygen (O2) Sensor, Oxygen (O2) harness is open or shorted, Oxygen (O2) circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,524
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2416 Dodge Description

The Engine Control Module (ECM) monitor the Oxygen (O2) Sensor performance. The OBDII code is set when the ECM finds the O2 Sensor signal out of factory specifications.
OBDII Code P2416 Dodge - O2 Sensor Signals Swapped Bank 1 Sensor 2/Bank 1 Sensor 3 - AutoCodes.com
P2416 Dodge Code - O2 Sensor Signals Swapped Bank 1 Sensor 2/Bank 1 Sensor 3

What are the Possible Causes of the DTC P2416 Dodge?

  • Faulty Oxygen (O2) Sensor
  • Oxygen (O2) harness is open or shorted
  • Oxygen (O2) circuit poor electrical connection

How to Fix the DTC P2416 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2416 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2416 Dodge code?

Need more information on how to fix the P2416 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2416 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2416 Dodge Code

1. What does the OBDII code P2416 mean on a Dodge vehicle?

P2416 indicates that the engine control module (ECM) has detected oxygen sensor signal discrepancies, suggesting that the signals from Bank 1 Sensor 2 and Bank 1 Sensor 3 may be swapped or incorrect.

2. What are the common symptoms of code P2416 in Dodge vehicles?

Symptoms may include poor fuel efficiency, rough idling, hesitation during acceleration, a check engine light, and potentially increased exhaust emissions.

3. What causes the P2416 code to appear?

Common causes include incorrectly installed oxygen sensors, damaged wiring or connectors, faulty oxygen sensors, or an ECM issue.

4. How do I diagnose the P2416 code on a Dodge?

Check the wiring and connectors for damage, verify proper oxygen sensor installation, use a scan tool to monitor live O2 sensor data, and ensure the ECM is functioning correctly.

5. Can a bad oxygen sensor trigger the P2416 code?

Yes, a faulty oxygen sensor on Bank 1 Sensor 2 or Sensor 3 can cause the ECM to misinterpret signals, triggering the P2416 code.

6. Can I drive my Dodge with the P2416 code active?

While the vehicle may still be drivable, it is not recommended to ignore the code, as it can lead to reduced performance, higher fuel consumption, and possible long-term engine or emissions system damage.

7. How do I fix the P2416 code on my Dodge vehicle?

Repairs may include correcting oxygen sensor wiring, replacing faulty oxygen sensors, or updating/reprogramming the ECM if necessary.

8. How much does it cost to repair the P2416 code?

Repair costs can vary depending on the specific issue but may range from $100 to $300 for parts and labor, depending on whether a sensor or wiring repair is needed.

9. Can a loose or corroded connector cause the P2416 code on a Dodge?

Yes, loose or corroded connectors can disrupt the oxygen sensor signals, leading to the P2416 code being triggered.

10. Is it necessary to reprogram the ECM to resolve the P2416 code?

Reprogramming the ECM is not always necessary but may be required if the code persists after addressing sensor or wiring issues.

Discuss the causes and fixes for P2416 Dodge OBDII Code

Code P2416 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play