P2407 - Evaporative Emission System Leak Detection Pump Sense Circuit Intermittent/Erratic
P2407 Possible Causes
- Faulty Leak Detection Pump
- Leak Detection Pump harness is open or shorted
- Leak Detection Pump circuit poor electrical connection
- Faulty Purge Valve
- Clogged or damaged charcoal canister
How do I fix code P2407?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P2407 code
Labor: 1.0The cost of diagnosing the P2407 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P2407 DescriptionThe Engine Control Module (ECM) checks power consumption on the Leak Detection Pump. The Diagnostic Trouble Code (DTC) can be diagnosed when the leak diagnostic system is run. A diagnostic trouble code is stored if the current consumption of the pump in the Leak Detection Pump unit varies too much during the reference phase.
More InformationNeed more information on how to fix the P2407 code?
Get Access to Factory Service Manuals
Information for specific makes
Need more help?Get the P2407 code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2407 code? Have you replaced any parts?
Any information is appreciated. Thanks