AutoCodes – Toyota – P2402 2018 Toyota RAV4

P2402 2018 Toyota RAV4 Code - Evaporative Emission Leak Detection Pump Stuck ON

Quick Answer

5 hours after the ignition switch is turned off, the leak detection pump creates negative pressure (vacuum) in the Evaporative Emission (EVAP) system. Common causes include Faulty Canister Pump Module, Canister Pump Module harness is open or shorted, Canister Pump Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2402 2018 Toyota RAV4 indicates Evaporative Emission Leak Detection Pump Stuck ON.
Common causes
Common causes include Faulty Canister Pump Module, Canister Pump Module harness is open or shorted, Canister Pump Module circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 744
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 30, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2402 2018 Toyota RAV4 Description

5 hours after the ignition switch is turned off, the leak detection pump creates negative pressure (vacuum) in the Evaporative Emission (EVAP) system. The Engine Control Module (ECM) monitors for leaks and actuator malfunctions based on the EVAP pressure. The leak detection pump creates negative pressure through the reference orifice. When the system is normal, the EVAP pressure is between 97 to 100 kPa(abs) [726 to 750 mmHg(abs) (Typical value)] and saturated within a minute. If not, the ECM interprets this as a malfunction. The ECM illuminates the MIL and stores a Diagnostic Trouble Code (DTC) if this malfunction is detected in consecutive drive cycles. The Canister Pump Module is attached to the EVAP Canister and contains the Canister Pressure Sensor, the Leak Detection Pump, and the Vent Valve.
OBDII Code P2402 2018 Toyota RAV4 - Evaporative Emission Leak Detection Pump Stuck ON - AutoCodes.com
P2402 2018 Toyota RAV4 Code - Evaporative Emission Leak Detection Pump Stuck ON

What are the Possible Causes of the DTC P2402 2018 Toyota RAV4?

  • Faulty Canister Pump Module
  • Canister Pump Module harness is open or shorted
  • Canister Pump Module circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P2402 2018 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2402 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2402 2018 Toyota RAV4 code?

Need more information on how to fix the P2402 2018 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2402 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2402 2018 Toyota RAV4 Code

1. What does the OBDII code P2402 on a 2018 Toyota RAV4 mean?

The code P2402 indicates a fault with the Evaporative Emission Leak Detection Pump being stuck ON.

2. What are common symptoms of the P2402 code in a 2018 Toyota RAV4?

Common symptoms include the check engine light being illuminated, decreased fuel efficiency, and a strong gasoline smell from the vehicle.

3. What can cause the P2402 code to trigger in a 2018 Toyota RAV4?

The code P2402 is often triggered by a malfunction in the Evaporative Emission Leak Detection Pump, a leak in the evaporative emission system, or a faulty pump control module.

4. How serious is the P2402 code in a 2018 Toyota RAV4?

While the P2402 code may not cause immediate drivability issues, it can lead to increased emissions and may result in a failed emissions test.

5. How can I diagnose the P2402 code in my 2018 Toyota RAV4?

Diagnosing the P2402 code typically involves inspecting the Evaporative Emission Leak Detection Pump, checking for leaks in the system, and testing the pump control module for proper operation.

6. What are the repair options for the P2402 code in a 2018 Toyota RAV4?

Repair options may include replacing the Evaporative Emission Leak Detection Pump, fixing any leaks in the system, or reprogramming the pump control module.

7. Can I drive my 2018 Toyota RAV4 with the P2402 code?

It is generally safe to drive your vehicle with the P2402 code, but it is recommended to address the issue promptly to prevent potential damage to the emission system.

8. How much does it cost to repair the P2402 code in a 2018 Toyota RAV4?

The cost of repairing the P2402 code can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars.

9. Can I reset the P2402 code in my 2018 Toyota RAV4 without fixing the issue?

While you can clear the code temporarily, the check engine light will likely reappear until the underlying problem is resolved.

10. Is the P2402 code a common issue in 2018 Toyota RAV4 vehicles?

The P2402 code related to the Evaporative Emission Leak Detection Pump stuck ON is a known issue in some 2018 Toyota RAV4 vehicles and has been reported by some owners.

Discuss the causes and fixes for P2402 2018 Toyota RAV4 OBDII Code

Code P2402 2018 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play