P2401 Dodge Code - Evaporative Emission System Leak Detection Pump Control Circuit Low
Quick Answer
5 hours after the ignition switch is turned OFF, the electric vacuum pump creates negative pressure (vacuum) in the EVAP (Evaporative Emission) system. Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2401 Dodge indicates Evaporative Emission System Leak Detection Pump Control Circuit Low.
- Common causes
- Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2401 Dodge Description
What are the Possible Causes of the DTC P2401 Dodge?
- Faulty Vacuum Pump Module
- Vacuum Pump Module harness is open or shorted
- Vacuum Pump Module circuit poor electrical connection.
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2401 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2401 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2401 Dodge code?
Need more information on how to fix the P2401 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2401 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2401 Dodge Code
1. What does the OBDII code P2401 mean for a Dodge vehicle?
P2401 indicates that the Evaporative Emission System Leak Detection Pump Control Circuit is experiencing a low voltage condition, which may prevent the system from properly detecting fuel vapor leaks.
2. What are the common symptoms of code P2401 on a Dodge?
Symptoms may include an illuminated check engine light, failed emissions test, reduced fuel efficiency, and in some cases, a noticeable fuel odor near the vehicle.
3. What causes the P2401 code to appear on my Dodge?
Common causes include a malfunctioning leak detection pump, damaged or corroded wiring/connectors in the circuit, a blown fuse, or a faulty ECM/PCM.
4. Can I drive my Dodge with the P2401 code?
While the vehicle may still drive, it is not recommended to ignore the issue as it can lead to increased emissions and other potential problems with the evaporative system.
5. How do I diagnose the P2401 code on a Dodge?
Diagnose the code by checking the wiring and connectors for damage or corrosion, testing the leak detection pump for proper operation, and verifying the fuse and control circuit voltage.
6. How do I fix the P2401 code on my Dodge?
Repairs may include replacing the leak detection pump, repairing or replacing damaged wiring or connectors, replacing a blown fuse, or addressing issues with the ECM/PCM if necessary.
7. What tools do I need to diagnose and repair the P2401 code?
You’ll need an OBDII scanner, a multimeter for electrical testing, and potentially wiring diagrams for your specific Dodge model.
8. How much does it cost to repair the P2401 code on a Dodge?
Repair costs can vary but typically range from $150 to $500 depending on whether the issue is with the leak detection pump, wiring, or other components.
9. Can a bad gas cap cause the P2401 code on a Dodge?
A bad gas cap is unlikely to cause this specific code, but it can trigger other evaporative system codes. Always ensure the gas cap is properly sealed.
10. Will clearing the P2401 code with an OBDII scanner fix the problem?
Clearing the code will turn off the check engine light temporarily, but if the underlying issue isn’t resolved, the code will likely return.
Discuss the causes and fixes for P2401 Dodge OBDII Code
Code P2401 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
