AutoCodes – Toyota – P2401 2011 Toyota Camry

P2401 2011 Toyota Camry Code - EVAP System Leak Detection Pump Control Circuit Low

Quick Answer

5 hours after the ignition switch is turned OFF, the electric vacuum pump creates negative pressure (vacuum) in the EVAP (Evaporative Emission) system. Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2401 2011 Toyota Camry indicates EVAP System Leak Detection Pump Control Circuit Low.
Common causes: Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,352

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2401 2011 Toyota Camry Description

5 hours after the ignition switch is turned OFF, the electric vacuum pump creates negative pressure (vacuum) in the EVAP (Evaporative Emission) system. The Engine Control Module (ECM) monitors for leaks and actuator malfunctions based on the EVAP pressure.

OBDII Code P2401 2011 Toyota Camry - EVAP System Leak Detection Pump Control Circuit Low - AutoCodes.com — P2401 2011 Toyota Camry Code - EVAP System Leak Detection Pump Control Circuit Low

What does this mean?

What are the Possible Causes of the DTC P2401 2011 Toyota Camry?

Faulty Vacuum Pump Module
Vacuum Pump Module harness is open or shorted
Vacuum Pump Module circuit poor electrical connection.
Faulty Engine Control Module (ECM)

How to Fix the DTC P2401 2011 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2401 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2401 2011 Toyota Camry code?

Need more information on how to fix the P2401 2011 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2401 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2401 2011 Toyota Camry Code

1. What are the common symptoms of OBDII code P2401 in a 2011 Toyota Camry?

- Common symptoms include the check engine light coming on, decreased fuel efficiency, and potentially a gasoline odor near the vehicle.

2. What are the possible causes of OBDII code P2401 in a 2011 Toyota Camry?

- Possible causes include a faulty leak detection pump, damaged wiring or connectors in the EVAP system, or a malfunctioning EVAP pressure sensor.

3. How can I diagnose the OBDII code P2401 in my 2011 Toyota Camry?

- Diagnosis typically involves using an OBDII scanner to retrieve the specific code, inspecting the EVAP system components for damage or leaks, and testing the leak detection pump and related circuitry.

4. Can I still drive my 2011 Toyota Camry with OBDII code P2401?

- It is generally safe to drive the vehicle with this code, but it is recommended to address the issue promptly to prevent potential damage to the EVAP system and ensure the vehicle passes emissions testing.

5. What repairs are typically needed to fix OBDII code P2401 in a 2011 Toyota Camry?

- Repairs may involve replacing the leak detection pump, repairing damaged wiring or connectors, or addressing any issues with the EVAP pressure sensor.

6. How much does it cost to repair OBDII code P2401 in a 2011 Toyota Camry?

- The cost of repairs can vary depending on the specific issue causing the code and whether you choose to address it yourself or take it to a mechanic. Costs may range from $100 to $500 or more.

7. Are there any DIY tips for fixing OBDII code P2401 in a 2011 Toyota Camry?

- DIY tips include checking for visible damage in the EVAP system components, testing the leak detection pump and related circuitry with a multimeter, and ensuring all connections are secure.

8. How long does it typically take to repair OBDII code P2401 in a 2011 Toyota Camry?

- The repair time can vary depending on the extent of the issue and your experience level. In general, it may take anywhere from 1 to 4 hours to diagnose and fix the problem.

9. Will resetting the check engine light make OBDII code P2401 go away in a 2011 Toyota Camry?

- Resetting the check engine light may temporarily turn it off, but if the underlying issue causing the code is not addressed, the light is likely to come back on.

10. Can OBDII code P2401 in a 2011 Toyota Camry cause any long-term damage if left untreated?

- If left untreated, OBDII code P2401 can potentially lead to increased emissions, decreased fuel efficiency, and may cause the vehicle to fail emissions testing. It is best to address the issue promptly.