AutoCodes – Toyota – P2401 2004 Toyota Prius

P2401 2004 Toyota Prius Code - EVAP System Leak Detection Pump Control Circuit Low

Quick Answer

5 hours after the ignition switch is turned OFF, the electric vacuum pump creates negative pressure (vacuum) in the EVAP (Evaporative Emission) system. Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2401 2004 Toyota Prius indicates EVAP System Leak Detection Pump Control Circuit Low.
Common causes: Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,895

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2401 2004 Toyota Prius Description

5 hours after the ignition switch is turned OFF, the electric vacuum pump creates negative pressure (vacuum) in the EVAP (Evaporative Emission) system. The Engine Control Module (ECM) monitors for leaks and actuator malfunctions based on the EVAP pressure.

OBDII Code P2401 2004 Toyota Prius - EVAP System Leak Detection Pump Control Circuit Low - AutoCodes.com — P2401 2004 Toyota Prius Code - EVAP System Leak Detection Pump Control Circuit Low

What does this mean?

What are the Possible Causes of the DTC P2401 2004 Toyota Prius?

Faulty Vacuum Pump Module
Vacuum Pump Module harness is open or shorted
Vacuum Pump Module circuit poor electrical connection
EVAP system hose (clogged, cracked or broken)
Faulty Engine Control Module (ECM)

How to Fix the DTC P2401 2004 Toyota Prius?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2401 2004 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2401 2004 Toyota Prius code?

Need more information on how to fix the P2401 2004 Toyota Prius code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2401 2004 Toyota Prius code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2401 2004 Toyota Prius Code

1. What does OBDII code P2401 for a 2004 Toyota Prius indicate?

The code P2401 indicates a problem with the EVAP (evaporative emission control) system leak detection pump control circuit being low.

2. What are common symptoms of OBDII code P2401 in a 2004 Toyota Prius?

Common symptoms of code P2401 may include the Check Engine Light (CEL) illuminating on the dashboard and potential issues with the vehicle's emission control system.

3. What are possible causes of OBDII code P2401 in a 2004 Toyota Prius?

Possible causes of code P2401 can include a faulty leak detection pump, damaged wiring or connectors in the circuit, or a malfunctioning EVAP system pressure sensor.

4. How can I diagnose the OBDII code P2401 in my 2004 Toyota Prius?

Diagnosing code P2401 typically involves using an OBDII scanner to read the code, inspecting the EVAP system components for any visible damage, and testing the leak detection pump and associated circuitry.

5. What are some repair tips for fixing OBDII code P2401 in a 2004 Toyota Prius?

Repair tips for addressing code P2401 may include replacing the leak detection pump, repairing any damaged wiring or connectors, and clearing the code with an OBDII scanner after completing the repairs.

6. Can I drive my 2004 Toyota Prius with OBDII code P2401?

It is generally not recommended to drive your vehicle with an unresolved OBDII code like P2401, as it can lead to potential issues with emissions compliance and overall vehicle performance.

7. How much does it typically cost to repair OBDII code P2401 in a 2004 Toyota Prius?

The cost of repairing code P2401 in a 2004 Toyota Prius can vary depending on the specific cause of the issue, but it may range from $100 to $500 or more, including parts and labor.

8. Will OBDII code P2401 in a 2004 Toyota Prius cause the vehicle to fail an emissions test?

Yes, having code P2401 present in the OBDII system of a 2004 Toyota Prius can potentially cause the vehicle to fail an emissions test due to issues with the EVAP system.

9. How long does it take to repair OBDII code P2401 in a 2004 Toyota Prius?

The repair time for code P2401 can vary depending on the extent of the issue and the specific repairs needed, but it may take anywhere from 1 to 3 hours to complete the repair.

10. Can I reset the Check Engine Light after fixing OBDII code P2401 in my 2004 Toyota Prius?

Yes, after successfully repairing the issue causing code P2401, you can reset the Check Engine Light using an OBDII scanner to clear the code and turn off the light on the dashboard.