AutoCodes – Dodge – P2341 Dodge

P2341 Dodge Code - Cylinder 6 Above Knock Threshold

Quick Answer

The Knock Sensor (KS) senses engine knocking (also known as detonation or pinging) using a piezoelectric element. Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2341 Dodge indicates Cylinder 6 Above Knock Threshold.
Common causes
Common causes include Faulty knock sensor, Knock sensor circuit poor electrical connection, Knock sensor harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,062
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2341 Dodge Description

The Knock Sensor (KS) senses engine knocking (also known as detonation or pinging) using a piezoelectric element. The sensor is attached to the cylinder block, cylinder head or intake manifold. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM). The ECM uses this signal to retard the ignition timing and protect the engine from this damaging pre-ignition.
OBDII Code P2341 Dodge - Cylinder 6 Above Knock Threshold - AutoCodes.com
P2341 Dodge Code - Cylinder 6 Above Knock Threshold

What are the Possible Causes of the DTC P2341 Dodge?

  • Faulty knock sensor
  • Knock sensor circuit poor electrical connection
  • Knock sensor harness is open or shorted
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P2341 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2341 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2341 Dodge code?

Need more information on how to fix the P2341 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2341 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2341 Dodge Code

Q1: What does the OBDII code P2341 mean on a Dodge?

A1: The P2341 code indicates that cylinder 6 has been detected as operating above the knock threshold, suggesting excessive engine knocking or detonation.

Q2: What are the common symptoms of code P2341 on a Dodge?

A2: Symptoms may include engine misfires, reduced performance, knocking noises, poor fuel economy, and the check engine light turning on.

Q3: What causes the P2341 code to appear?

A3: Common causes include a faulty knock sensor, incorrect fuel mixture, carbon buildup on cylinder 6, low-quality fuel, or ignition system problems.

Q4: Can driving with the P2341 code damage my Dodge engine?

A4: Yes, prolonged knocking can lead to severe engine damage, including piston or cylinder wall failure, if not addressed promptly.

Q5: How do I diagnose the P2341 code on my Dodge?

A5: Diagnosis typically involves checking the knock sensor, inspecting cylinder 6 for carbon buildup, testing the ignition system, and verifying fuel quality or fuel pressure.

Q6: How can I fix the P2341 code on a Dodge?

A6: Repairs may include replacing the knock sensor, cleaning cylinder 6, using higher-quality fuel, adjusting the air/fuel mixture, or addressing ignition system issues.

Q7: Can a bad knock sensor cause the P2341 code?

A7: Yes, a malfunctioning knock sensor can fail to detect or incorrectly report knocking, triggering the P2341 code.

Q8: Is low-quality fuel a possible cause of the P2341 code?

A8: Yes, low-octane or contaminated fuel can increase engine knock, leading to the P2341 code.

Q9: Will resetting the check engine light clear the P2341 code permanently?

A9: Resetting the light may temporarily clear the code, but the underlying issue must be resolved to prevent the code from returning.

Q10: How much does it typically cost to fix the P2341 code on a Dodge?

A10: Costs vary, but repairs can range from $100 to $500 depending on the cause, such as knock sensor replacement or cleaning cylinder 6.

Discuss the causes and fixes for P2341 Dodge OBDII Code

Code P2341 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play