P2328 Dodge Code - Ignition Coil 'J' Primary Control Circuit High
Quick Answer
The current flow, or dwell, through the primary ignition coil is controlled by the Powertrain Control Module (PCM) by providing a switched ground path through the ignition coil driver to ground. Common causes include Faulty Ignition Coil 'J', Ignition Coil 'J' harness is open or shorted, Ignition Coil 'J' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2328 Dodge indicates Ignition Coil 'J' Primary Control Circuit High.
- Common causes
- Common causes include Faulty Ignition Coil 'J', Ignition Coil 'J' harness is open or shorted, Ignition Coil 'J' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2328 Dodge Description
What are the Possible Causes of the DTC P2328 Dodge?
- Faulty Ignition Coil 'J'
- Ignition Coil 'J' harness is open or shorted
- Ignition Coil 'J' circuit poor electrical connection
How to Fix the DTC P2328 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2328 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2328 Dodge code?
Need more information on how to fix the P2328 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2328 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2328 Dodge Code
1. What are the common symptoms of OBDII code P2328 in a Dodge, indicating an Ignition Coil 'J' Primary Control Circuit High issue?
The common symptoms include engine misfires, rough idling, loss of power, and illuminated Check Engine Light.
2. What are the possible causes of OBDII code P2328 in a Dodge related to the Ignition Coil 'J' Primary Control Circuit High?
Possible causes include a faulty ignition coil, damaged wiring or connectors in the ignition system, or a problem with the Engine Control Module (ECM).
3. How can I diagnose the source of the Ignition Coil 'J' Primary Control Circuit High issue causing OBDII code P2328 in my Dodge?
You can use a multimeter to test the resistance of the ignition coil, visually inspect the wiring and connectors for any damage, and perform a scan tool diagnosis to check for ECM communication errors.
4. Can a DIY enthusiast repair the Ignition Coil 'J' Primary Control Circuit High issue triggering OBDII code P2328 in a Dodge?
Yes, if you have the necessary tools and knowledge, you can replace the faulty ignition coil, repair damaged wiring or connectors, and clear the code using an OBDII scanner.
5. How important is it to address the OBDII code P2328 related to the Ignition Coil 'J' Primary Control Circuit High in a Dodge promptly?
It is crucial to address this issue promptly to prevent further damage to the engine, improve fuel efficiency, and ensure optimal performance of your vehicle.
6. Are there any preventive maintenance tips to avoid encountering OBDII code P2328 due to Ignition Coil 'J' Primary Control Circuit High in a Dodge?
Regularly inspecting and maintaining your ignition system, including checking for loose connections and replacing worn-out components, can help prevent this issue.
7. Can driving with OBDII code P2328 present, signaling an Ignition Coil 'J' Primary Control Circuit High problem in a Dodge, cause any long-term damage?
Continuously driving with this issue may lead to more severe engine problems, such as catalytic converter damage or permanent engine misfires, if left unaddressed.
8. Is it safe to continue driving my Dodge with the Check Engine Light on due to OBDII code P2328 related to the Ignition Coil 'J' Primary Control Circuit High?
It is not recommended to drive your vehicle extensively with the Check Engine Light on, as it signifies an underlying issue that requires attention to avoid potential safety hazards or further damage.
9. How much does it typically cost to repair the Ignition Coil 'J' Primary Control Circuit High issue causing OBDII code P2328 in a Dodge at a professional auto repair shop?
The cost can vary depending on the extent of the problem, but you can expect to pay for parts such as an ignition coil and labor for diagnostics and repairs, which may range from $150 to $400 or more.
10. Can resetting the OBDII system clear the P2328 code related to the Ignition Coil 'J' Primary Control Circuit High in a Dodge, or is a proper repair necessary?
Resetting the system may temporarily clear the code, but it will likely return if the underlying issue is not addressed. Proper diagnosis and repair are essential to resolve the problem effectively.
Discuss the causes and fixes for P2328 Dodge OBDII Code
Code P2328 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
