AutoCodes – Mercury – P2325 Mercury

P2325 Mercury Code - Ignition Coil 'I' Primary Control Circuit High

Quick Answer

The current flow, or dwell, through the primary ignition coil is controlled by the Powertrain Control Module (PCM) by providing a switched ground path through the ignition coil driver to ground. Common causes include Faulty Ignition Coil 'I', Ignition Coil 'I' harness is open or shorted, Ignition Coil 'I' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2325 Mercury indicates Ignition Coil 'I' Primary Control Circuit High.
Common causes: Common causes include Faulty Ignition Coil 'I', Ignition Coil 'I' harness is open or shorted, Ignition Coil 'I' circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,100

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2325 Mercury Description

The current flow, or dwell, through the primary ignition coil is controlled by the Powertrain Control Module (PCM) by providing a switched ground path through the ignition coil driver to ground. When the ignition coil driver is switched on, current rapidly builds up to a maximum value, determined by the coil inductance and resistance. When the current is switched off, the magnetic field collapses which induces a secondary high voltage surge and the spark plug is fired. This high voltage surge creates a flyback voltage which the PCM uses as a feedback during the ignition diagnostics. The PCM continuously monitors the ignition system for concerns. The P2325 code sets when the PCM detects a short to voltage in the circuit.

OBDII Code P2325 Mercury - Ignition Coil 'I' Primary Control Circuit High - AutoCodes.com — P2325 Mercury Code - Ignition Coil 'I' Primary Control Circuit High

What does this mean?

What are the Possible Causes of the DTC P2325 Mercury?

Faulty Ignition Coil 'I'
Ignition Coil 'I' harness is open or shorted
Ignition Coil 'I' circuit poor electrical connection

How to Fix the DTC P2325 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2325 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2325 Mercury code?

Need more information on how to fix the P2325 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2325 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2325 Mercury Code

What does the OBDII code P2325 mean for a Mercury vehicle?

The code P2325 indicates that there is a high voltage detected in the primary control circuit of ignition coil 'I'. This typically suggests a problem with the ignition coil, wiring, or the engine control module (ECM).

What are the common symptoms of a P2325 code?

Common symptoms include engine misfires, rough idling, decreased engine performance, difficulty starting the engine, and illuminated check engine light.

What could cause the P2325 code to trigger?

Possible causes include a faulty ignition coil, damaged wiring or connectors in the ignition system, a malfunctioning ECM, or issues with the ignition control module.

How can I diagnose the P2325 code?

To diagnose the P2325 code, inspect the ignition coil and its wiring for damage or corrosion, test the ignition coilâ€™s resistance, and check for any other codes that may indicate related issues.

What repairs are typically needed to fix a P2325 code?

Repairs may involve replacing the faulty ignition coil, repairing or replacing damaged wiring or connectors, or addressing any issues with the ECM or ignition control module.

Can I drive my car with a P2325 code?

While it may be possible to drive the vehicle, it is not advisable because it can lead to further engine damage and reduced performance. Itâ€™s best to address the issue promptly.

How can I prevent the P2325 code from occurring in the future?

Regular maintenance of the ignition system, including checking and replacing ignition coils as needed, can help prevent this code from appearing. Also, ensure that all electrical connections are clean and secure.

Is it safe to replace the ignition coil myself to fix the P2325 code?

If you have experience with automotive repairs and understand the ignition system, it can be safe to replace the ignition coil yourself. However, if you're unsure, it's best to consult a professional mechanic.

What tools do I need to troubleshoot a P2325 code?

To troubleshoot a P2325, you will typically need an OBDII scanner to read codes, a multimeter to test electrical components, and basic hand tools for accessing and replacing the ignition coil.