P2319 Audi Code - Ignition Coil 7 Primary Control Circuit High
Quick Answer
The current flow, or dwell, through the primary ignition coil is controlled by the Powertrain Control Module (PCM) by providing a switched ground path through the ignition coil driver to ground. Common causes include Faulty Ignition Coil 7, Ignition Coil 7 harness is open or shorted, Ignition Coil 7 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2319 Audi indicates Ignition Coil 7 Primary Control Circuit High.
- Common causes
- Common causes include Faulty Ignition Coil 7, Ignition Coil 7 harness is open or shorted, Ignition Coil 7 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2319 Audi Description
What are the Possible Causes of the DTC P2319 Audi?
- Faulty Ignition Coil 7
- Ignition Coil 7 harness is open or shorted
- Ignition Coil 7 circuit poor electrical connection
How to Fix the DTC P2319 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2319 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2319 Audi code?
Need more information on how to fix the P2319 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2319 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2319 Audi Code
1. What are the common symptoms of OBDII code P2319 in an Audi related to Ignition Coil 7 Primary Control Circuit High?
- Common symptoms may include engine misfires, rough idle, loss of power, and illuminated Check Engine Light.
2. What can cause the OBDII code P2319 to trigger in an Audi?
- The code P2319 is typically triggered by issues such as a faulty ignition coil, wiring issues in the ignition coil circuit, or a problem with the Engine Control Module (ECM).
3. How can I diagnose the root cause of OBDII code P2319 in my Audi?
- To diagnose the issue, you can start by checking the ignition coil for signs of damage, testing the wiring for continuity, and using a diagnostic scanner to inspect the ECM for any faults.
4. Can a bad spark plug lead to the OBDII code P2319 in an Audi?
- Yes, a faulty spark plug can cause irregularities in the ignition system, which may lead to the triggering of code P2319 related to Ignition Coil 7 Primary Control Circuit High.
5. What are the recommended steps to repair OBDII code P2319 in an Audi?
- The repair process may involve replacing the faulty ignition coil, repairing any damaged wiring, clearing the error code, and conducting a thorough test drive to ensure the issue is resolved.
6. Is it safe to continue driving my Audi with the OBDII code P2319 present?
- It is not recommended to drive your Audi with the code P2319 active, as it can lead to further engine damage and potential safety hazards. It's best to address the issue promptly.
7. Can a DIY enthusiast fix the OBDII code P2319 issue in an Audi?
- Depending on your automotive repair skills, you may be able to address the issue yourself by following proper diagnostic procedures and replacing the necessary components like the ignition coil.
8. How much does it typically cost to repair OBDII code P2319 in an Audi at a professional mechanic or dealership?
- The repair cost can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor at a reputable mechanic or dealership.
9. Will resetting the Check Engine Light resolve the OBDII code P2319 in an Audi?
- Resetting the Check Engine Light may temporarily clear the code, but if the underlying issue causing code P2319 is not addressed, the light is likely to come back on.
10. Can extreme weather conditions impact the triggering of OBDII code P2319 in an Audi?
- Extreme weather conditions such as excessive heat or moisture can potentially exacerbate existing issues with the ignition system, leading to the triggering of code P2319.
Discuss the causes and fixes for P2319 Audi OBDII Code
Code P2319 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
