AutoCodes – GMC – P2316 GMC

P2316 GMC Code - Ignition Coil 6 Control Circuit High Voltage

Quick Answer

The ignition system on this engine uses ignition coils with integrated power transistors. Common causes include Faulty Ignition Coil 6, Ignition Coil 6 harness is open or shorted, Ignition Coil 6 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2316 GMC indicates Ignition Coil 6 Control Circuit High Voltage.
Common causes: Common causes include Faulty Ignition Coil 6, Ignition Coil 6 harness is open or shorted, Ignition Coil 6 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 584

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 31, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2316 GMC Description

The ignition system on this engine uses ignition coils with integrated power transistors. The Engine Control Module (ECM) controls the spark event for each cylinder through individual ignition coil control circuits. When the ECM commands the ignition control circuit On, electrical current flows through the primary winding of the ignition coil, creating a magnetic field. When a spark event is requested, the ECM commands the ignition control circuit Off, interrupting current flow through the primary winding. The collapsing magnetic field created by the primary winding induces a high voltage in the secondary winding, which is connected to the spark plugs. The Diagnostic Trouble Code (DTC) will be set when the control circuit commanded by the ECM state does not match the actual state.

OBDII Code P2316 GMC - Ignition Coil 6 Control Circuit High Voltage - AutoCodes.com — P2316 GMC Code - Ignition Coil 6 Control Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P2316 GMC?

Faulty Ignition Coil 6
Ignition Coil 6 harness is open or shorted
Ignition Coil 6 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2316 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2316 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2316 GMC code?

Need more information on how to fix the P2316 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2316 GMC code diagnosed by a professional: Find a repair shop in your area

Information for Specific GMC Models

P2316 2014 GMC Sierra — Ignition Coil 6 Control Circuit High Voltage
P2316 2015 GMC Sierra — Ignition Coil 6 Control Circuit High Voltage
P2316 2016 GMC Sierra — Ignition Coil 6 Control Circuit High Voltage
P2316 2017 GMC Sierra — Ignition Coil 6 Control Circuit High Voltage
P2316 2018 GMC Sierra — Ignition Coil 6 Control Circuit High Voltage

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2316 GMC Code

1. What are common symptoms of OBDII code P2316 GMC (Ignition Coil 6 Control Circuit High Voltage)?

- Common symptoms include engine misfires, rough idling, loss of power, and illuminated check engine light.

2. What can cause OBDII code P2316 GMC to trigger?

- The code may trigger due to a faulty ignition coil, wiring issues, a defective PCM, or a problem with the ignition coil control circuit.

3. How can I diagnose the cause of OBDII code P2316 GMC?

- You can diagnose the issue by performing a visual inspection of the ignition coil and its wiring, testing the ignition coil with a multimeter, and checking for any loose connections.

4. Can a bad spark plug cause OBDII code P2316 GMC to set?

- Yes, a bad spark plug can contribute to the triggering of this code as it can affect the performance of the ignition coil and lead to high voltage in the control circuit.

5. What are the repair options for OBDII code P2316 GMC?

- Repair options include replacing the faulty ignition coil, repairing or replacing damaged wiring, checking and repairing any connection issues, and resetting the fault code.

6. Is it safe to continue driving with OBDII code P2316 GMC present?

- It is not recommended to drive with this code present as it can lead to further damage to the engine and other components, potentially causing more severe issues.

7. Can I clear OBDII code P2316 GMC with a simple reset?

- While clearing the code may temporarily turn off the check engine light, it is important to address the underlying issue causing the code to prevent future problems.

8. How can I prevent OBDII code P2316 GMC from reoccurring?

- Regularly maintaining your vehicle, checking and replacing spark plugs and ignition coils as needed, and addressing any wiring issues promptly can help prevent the code from reoccurring.

9. Will OBDII code P2316 GMC affect fuel efficiency?

- Yes, this code can affect fuel efficiency due to engine misfires and inefficient combustion caused by ignition system malfunctions.

10. Can a DIY enthusiast repair OBDII code P2316 GMC themselves?

- Depending on their skill level, a DIY enthusiast may be able to diagnose and repair this code by following proper procedures, using the right tools, and ensuring safety precautions are taken.