AutoCodes – Volkswagen – P2310 Volkswagen

P2310 Volkswagen Code - Ignition Coil 4 Primary Control Circuit High

Quick Answer

The current flow, or dwell, through the primary ignition coil is controlled by the Powertrain Control Module (PCM) by providing a switched ground path through the ignition coil driver to ground. Common causes include Faulty Ignition Coil 4, Ignition Coil 4 harness is open or shorted, Ignition Coil 4 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2310 Volkswagen indicates Ignition Coil 4 Primary Control Circuit High.
Common causes: Common causes include Faulty Ignition Coil 4, Ignition Coil 4 harness is open or shorted, Ignition Coil 4 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,336

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2310 Volkswagen Description

The current flow, or dwell, through the primary ignition coil is controlled by the Powertrain Control Module (PCM) by providing a switched ground path through the ignition coil driver to ground. When the ignition coil driver is switched on, current rapidly builds up to a maximum value, determined by the coil inductance and resistance. When the current is switched off, the magnetic field collapses which induces a secondary high voltage surge and the spark plug is fired. This high voltage surge creates a flyback voltage which the PCM uses as a feedback during the ignition diagnostics. The PCM continuously monitors the ignition system for concerns. The P2310 code sets when the PCM detects a short to voltage in the circuit.

OBDII Code P2310 Volkswagen - Ignition Coil 4 Primary Control Circuit High - AutoCodes.com — P2310 Volkswagen Code - Ignition Coil 4 Primary Control Circuit High

What does this mean?

What are the Possible Causes of the DTC P2310 Volkswagen?

Faulty Ignition Coil 4
Ignition Coil 4 harness is open or shorted
Ignition Coil 4 circuit poor electrical connection

How to Fix the DTC P2310 Volkswagen?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2310 Volkswagen code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2310 Volkswagen code?

Need more information on how to fix the P2310 Volkswagen code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2310 Volkswagen code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2310 Volkswagen Code

1. What does the P2310 code mean on a Volkswagen?

The P2310 code indicates an issue with the Ignition Coil 4 Primary Control Circuit, specifically a high voltage condition.

2. What are the common symptoms of the P2310 code in a Volkswagen?

Symptoms can include engine misfires, rough idling, reduced power, poor fuel economy, and an illuminated Check Engine Light.

3. What causes the P2310 code to appear?

Common causes include a faulty ignition coil, damaged wiring or connectors in the ignition circuit, a malfunctioning ECM, or electrical issues such as short circuits.

4. Can I drive my Volkswagen with the P2310 code active?

Driving with this code active is not recommended, as it can lead to engine misfires, reduced performance, and potential damage to the catalytic converter.

5. How do I diagnose the P2310 code on my Volkswagen?

Diagnosis typically involves inspecting the ignition coil, checking for damaged wiring or connectors, testing the circuit voltage, and using a diagnostic scanner to verify the code.

6. How do I fix the P2310 code on a Volkswagen?

Repairs may include replacing the faulty ignition coil, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the ECM if necessary.

7. How much does it cost to fix the P2310 code on a Volkswagen?

Repair costs vary but typically range from $100 to $400, depending on whether the ignition coil, wiring, or ECM needs replacement.

8. Can a bad spark plug cause the P2310 code?

While a bad spark plug is not a direct cause of this code, it can contribute to ignition issues that may trigger related codes or symptoms.

9. Will clearing the P2310 code fix the problem permanently?

Clearing the code will not fix the underlying issue. The cause of the high voltage condition must be diagnosed and repaired to prevent the code from returning.

10. How can I prevent the P2310 code from occurring in the future?

Regular maintenance, such as inspecting ignition components and ensuring proper electrical connections, can help prevent this code from reappearing.