P2308 Suzuki Code - Ignition Coil 3 Secondary Circuit
Quick Answer
The current flow, or dwell, through the primary ignition coil is controlled by the Powertrain Control Module (PCM) by providing a switched ground path through the ignition coil driver to ground. Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2308 Suzuki indicates Ignition Coil 3 Secondary Circuit.
- Common causes
- Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2308 Suzuki Description
What are the Possible Causes of the DTC P2308 Suzuki?
- Faulty Ignition Coil 3
- Ignition Coil 3 harness is open or shorted
- Ignition Coil 3 circuit poor electrical connection
How to Fix the DTC P2308 Suzuki?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2308 Suzuki code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2308 Suzuki code?
Need more information on how to fix the P2308 Suzuki code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2308 Suzuki code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2308 Suzuki Code
1. What are the common symptoms of OBDII code P2308 Suzuki (Ignition Coil 3 Secondary Circuit)?
Common symptoms include engine misfires, rough idle, loss of power, and illuminated Check Engine Light.
2. What can cause OBDII code P2308 Suzuki to trigger?
The code P2308 is typically triggered by issues such as a faulty ignition coil, wiring problems in the ignition coil circuit, or a defective Engine Control Module (ECM).
3. How can I diagnose the cause of OBDII code P2308 Suzuki?
Diagnosing the issue involves inspecting the ignition coil, checking the wiring for any damage or loose connections, and using a multimeter to test the continuity and resistance of the circuit components.
4. Can a bad spark plug cause OBDII code P2308 to appear?
While a bad spark plug can contribute to ignition problems, the OBDII code P2308 specifically relates to issues with the ignition coil and its secondary circuit.
5. What is the repair process for OBDII code P2308 Suzuki?
The repair process involves replacing the faulty ignition coil if necessary, repairing any damaged wiring, and clearing the trouble code with an OBDII scanner.
6. Are there any preventive maintenance tips to avoid OBDII code P2308 Suzuki?
Routine maintenance such as regular spark plug and ignition coil inspections, as well as keeping an eye on the condition of the wiring harness, can help prevent issues that trigger code P2308.
7. Can I continue driving with OBDII code P2308 Suzuki present?
It is not recommended to drive with the code P2308 active, as it can lead to poor engine performance, reduced fuel efficiency, and potential damage to other engine components.
8. Will resetting the Check Engine Light clear OBDII code P2308 permanently?
Resetting the Check Engine Light will clear the code temporarily, but if the underlying issue causing P2308 is not addressed, the code is likely to reappear.
9. How much does it typically cost to repair OBDII code P2308 Suzuki at a mechanic?
The cost of repairing OBDII code P2308 can vary depending on the specific cause of the issue, but it generally ranges from $150 to $300 for parts and labor.
10. Can I fix OBDII code P2308 Suzuki myself, or should I take it to a professional mechanic?
If you have experience with automotive repairs and diagnostics, you may be able to address the issue causing code P2308 yourself. However, if you are unsure or unfamiliar with such repairs, it's best to seek the help of a professional mechanic.
Discuss the causes and fixes for P2308 Suzuki OBDII Code
Code P2308 Suzuki comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
