AutoCodes – Buick – P2306 Buick

P2306 Buick Code - Ignition Coil 3 Control Circuit Low Voltage

Quick Answer

The ignition system on this engine uses ignition coils with integrated power transistors. Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2306 Buick indicates Ignition Coil 3 Control Circuit Low Voltage.
Common causes
Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 442
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 31, 2021
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2306 Buick Description

The ignition system on this engine uses ignition coils with integrated power transistors. The Engine Control Module (ECM) controls the spark event for each cylinder through individual ignition coil control circuits. When the ECM commands the ignition control circuit On, electrical current flows through the primary winding of the ignition coil, creating a magnetic field. When a spark event is requested, the ECM commands the ignition control circuit Off, interrupting current flow through the primary winding. The collapsing magnetic field created by the primary winding induces a high voltage in the secondary winding, which is connected to the spark plugs. The Diagnostic Trouble Code (DTC) will be set when the control circuit commanded by the ECM state does not match the actual state.
OBDII Code P2306 Buick - Ignition Coil 3 Control Circuit Low Voltage - AutoCodes.com
P2306 Buick Code - Ignition Coil 3 Control Circuit Low Voltage

What are the Possible Causes of the DTC P2306 Buick?

  • Faulty Ignition Coil 3
  • Ignition Coil 3 harness is open or shorted
  • Ignition Coil 3 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P2306 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2306 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2306 Buick code?

Need more information on how to fix the P2306 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2306 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2306 Buick Code

What does the code P2306 mean for a Buick?

It indicates a problem with the Ignition Coil 3 Control Circuit, specifically low voltage detected by the powertrain control module (PCM).

What are the common symptoms of P2306 in a Buick?

Symptoms may include engine misfires, rough idle, reduced fuel efficiency, difficulty starting, and the check engine light turning on.

What causes the P2306 code in a Buick?

Common causes include a faulty ignition coil, damaged wiring or connectors, a malfunctioning PCM, or issues with the coil driver circuit.

Can I drive my Buick with the P2306 code?

While your vehicle may still run, driving with this code can result in poor performance, reduced fuel efficiency, and potential damage to other engine components.

How do I diagnose the P2306 code in a Buick?

Start by inspecting the ignition coil, wiring, and connectors for damage. Use a multimeter to check for proper voltage and continuity in the circuit.

What tools are required to repair the P2306 code?

You may need an OBD-II scanner, multimeter, and basic tools like screwdrivers and pliers to inspect and replace components.

How do I fix the P2306 code in a Buick?

Repairs may include replacing the ignition coil, repairing or replacing damaged wiring, cleaning or reconnecting connectors, or reprogramming the PCM if necessary.

How much does it cost to repair the P2306 code on a Buick?

Costs vary but typically range from $100 to $300 for parts and labor, depending on the extent of the damage and whether the PCM needs reprogramming.

Can the P2306 code be caused by a dead battery?

Yes, a weak or dead battery can disrupt voltage levels and contribute to ignition coil circuit issues like the P2306 code.

Do I need to reset the code after repairs?

Yes, after completing repairs, use an OBD-II scanner to clear the code and verify that the issue has been resolved.

Discuss the causes and fixes for P2306 Buick OBDII Code

Code P2306 Buick comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play