AutoCodesGMC – P2306 2015 GMC Sierra

P2306 2015 GMC Sierra Code - Ignition Coil 3 Control Circuit Low Voltage

Quick Answer

The ignition system on this engine uses ignition coils with integrated power transistors. Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2306 2015 GMC Sierra indicates Ignition Coil 3 Control Circuit Low Voltage.
Common causes
Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 172
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 25, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2306 2015 GMC Sierra Description

The ignition system on this engine uses ignition coils with integrated power transistors. The Engine Control Module (ECM) controls the spark event for each cylinder through individual ignition coil control circuits. When the ECM commands the ignition control circuit On, electrical current flows through the primary winding of the ignition coil, creating a magnetic field. When a spark event is requested, the ECM commands the ignition control circuit Off, interrupting current flow through the primary winding. The collapsing magnetic field created by the primary winding induces a high voltage in the secondary winding, which is connected to the spark plugs. The Diagnostic Trouble Code (DTC) will be set when the control circuit commanded by the ECM state does not match the actual state.
OBDII Code P2306 2015 GMC Sierra - Ignition Coil 3 Control Circuit Low Voltage - AutoCodes.com
P2306 2015 GMC Sierra Code - Ignition Coil 3 Control Circuit Low Voltage

What are the Possible Causes of the DTC P2306 2015 GMC Sierra?

  • Faulty Ignition Coil 3
  • Ignition Coil 3 harness is open or shorted
  • Ignition Coil 3 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P2306 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2306 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2306 2015 GMC Sierra code?

Need more information on how to fix the P2306 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2306 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2306 2015 GMC Sierra Code

What does code P2306 mean for a 2015 GMC Sierra?

Code P2306 indicates a low voltage condition in the Ignition Coil 3 control circuit, which can impact engine performance.

What are the common symptoms of P2306 in a 2015 GMC Sierra?

Symptoms include engine misfires, rough idling, decreased fuel efficiency, poor acceleration, and possible illumination of the Check Engine Light.

What causes the P2306 code in a 2015 GMC Sierra?

Causes may include a faulty ignition coil, damaged wiring or connectors in the control circuit, a bad ECM, or issues with the coil driver circuitry.

Can I drive my 2015 GMC Sierra with the P2306 code?

Driving with this code can lead to further engine damage or reduced performance. It’s recommended to address the issue promptly.

How do I diagnose the P2306 code in a 2015 GMC Sierra?

Diagnosis involves inspecting the ignition coil, checking for damaged wiring or connectors, testing the ECM, and using a multimeter to measure voltage in the control circuit.

What tools are needed to fix the P2306 code?

Common tools include an OBDII scanner, multimeter, wiring diagrams, and basic hand tools for removing and replacing ignition components.

How much does it cost to fix the P2306 code?

Repair costs vary but typically range from $100 to $300, depending on whether you replace the ignition coil, repair wiring, or address ECM issues.

What is the first step to fixing the P2306 code?

Start by inspecting the wiring and connectors for damage or corrosion near Ignition Coil 3 and replace or repair them as needed.

Can a bad ignition coil cause the P2306 code?

Yes, a malfunctioning ignition coil can cause the P2306 code due to insufficient voltage in the control circuit.

Should I replace the ECM if I see the P2306 code?

Replacing the ECM is a last resort after confirming that the ignition coil and wiring are in good condition and the issue persists.

Discuss the causes and fixes for P2306 2015 GMC Sierra OBDII Code

Code P2306 2015 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play