AutoCodes – Buick – P2304 Buick

P2304 Buick Code - Ignition Coil 2 Control Circuit High Voltage

Quick Answer

The ignition system on this engine uses ignition coils with integrated power transistors. Common causes include Faulty Ignition Coil 2, Ignition Coil 2 harness is open or shorted, Ignition Coil 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2304 Buick indicates Ignition Coil 2 Control Circuit High Voltage.
Common causes: Common causes include Faulty Ignition Coil 2, Ignition Coil 2 harness is open or shorted, Ignition Coil 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 406

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 31, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2304 Buick Description

The ignition system on this engine uses ignition coils with integrated power transistors. The Engine Control Module (ECM) controls the spark event for each cylinder through individual ignition coil control circuits. When the ECM commands the ignition control circuit On, electrical current flows through the primary winding of the ignition coil, creating a magnetic field. When a spark event is requested, the ECM commands the ignition control circuit Off, interrupting current flow through the primary winding. The collapsing magnetic field created by the primary winding induces a high voltage in the secondary winding, which is connected to the spark plugs. The Diagnostic Trouble Code (DTC) will be set when the control circuit commanded by the ECM state does not match the actual state.

OBDII Code P2304 Buick - Ignition Coil 2 Control Circuit High Voltage - AutoCodes.com — P2304 Buick Code - Ignition Coil 2 Control Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P2304 Buick?

Faulty Ignition Coil 2
Ignition Coil 2 harness is open or shorted
Ignition Coil 2 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2304 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2304 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2304 Buick code?

Need more information on how to fix the P2304 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2304 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2304 Buick Code

What does the OBDII code P2304 mean on a Buick?

1. Code P2304 indicates a high voltage issue in the ignition coil 2 control circuit, which can affect the performance of the engine's ignition system. 2.

What are the common symptoms of code P2304 in a Buick?

Symptoms may include engine misfires, rough idling, poor acceleration, reduced fuel efficiency, and the check engine light being illuminated. 3.

What causes the P2304 code to appear on a Buick?

Possible causes include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, a malfunctioning Powertrain Control Module (PCM), or corrosion on electrical connections. 4.

How can I diagnose the P2304 code in my Buick?

Diagnosis typically involves using a scan tool to confirm the code, inspecting the ignition coil 2 and its circuit for damage or loose connections, and testing the coil and PCM for proper operation. 5.

Can I drive my Buick with a P2304 code?

Driving with this code is not recommended, as it can lead to engine misfires and potential damage to the catalytic converter or other engine components. 6.

How do I fix the P2304 code on a Buick?

Repairs may include replacing the ignition coil, repairing or replacing damaged wiring, cleaning or securing electrical connectors, or reprogramming or replacing the PCM if necessary. 7.

How much does it cost to fix code P2304 on a Buick?

Costs can vary, but replacing an ignition coil typically ranges from $100 to $250, while wiring or PCM repairs may be more expensive depending on the extent of the damage. 8.

Can a bad spark plug cause the P2304 code on a Buick?

While unlikely, a faulty spark plug could indirectly contribute to ignition issues. Always inspect the spark plugs during diagnosis to rule out related problems. 9.

What tools are needed to troubleshoot the P2304 code in a Buick?

Basic tools include a scan tool or OBDII scanner, a multimeter for testing electrical circuits, and possibly an oscilloscope for analyzing ignition coil performance. 10.

Will clearing the P2304 code fix the problem on my Buick?

Clearing the code may temporarily turn off the check engine light, but it wonâ€™t resolve the underlying issue. Proper diagnosis and repair are necessary to prevent the code from returning.