AutoCodes – GMC – P22B6 2014 GMC Sierra

P22B6 2014 GMC Sierra Code - HO2S Pump Current Trim Circuit Low Voltage Sensor 2

Quick Answer

The oxygen content of the exhaust is measured via the nitrogen oxide (NOx) sensors. Common causes include Faulty Nitrogen Oxide (NOx) Sensor 2, Nitrogen Oxide Sensor 2 harness is open or shorted, Nitrogen Oxide Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P22B6 2014 GMC Sierra indicates HO2S Pump Current Trim Circuit Low Voltage Sensor 2.
Common causes: Common causes include Faulty Nitrogen Oxide (NOx) Sensor 2, Nitrogen Oxide Sensor 2 harness is open or shorted, Nitrogen Oxide Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 145

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 30, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P22B6 2014 GMC Sierra Description

The oxygen content of the exhaust is measured via the nitrogen oxide (NOx) sensors. The nitrogen oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the ECM. Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set when the NOx sensor module detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor.

OBDII Code P22B6 2014 GMC Sierra - HO2S Pump Current Trim Circuit Low Voltage Sensor 2 - AutoCodes.com — P22B6 2014 GMC Sierra Code - HO2S Pump Current Trim Circuit Low Voltage Sensor 2

What does this mean?

What are the Possible Causes of the DTC P22B6 2014 GMC Sierra?

Faulty Nitrogen Oxide (NOx) Sensor 2
Nitrogen Oxide Sensor 2 harness is open or shorted
Nitrogen Oxide Sensor 2 circuit poor electrical connection

How to Fix the DTC P22B6 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P22B6 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P22B6 2014 GMC Sierra code?

Need more information on how to fix the P22B6 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P22B6 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P22B6 2014 GMC Sierra Code

1. What are some common symptoms of OBDII code P22B6 on a 2014 GMC Sierra?

- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and the illumination of the check engine light.

2. What does the HO2S Pump Current Trim Circuit Low Voltage Sensor 2 error code indicate in a 2014 GMC Sierra?

- This code indicates an issue with the oxygen sensor (HO2S) pump current trim circuit, particularly low voltage detected in Sensor 2.

3. What are possible causes of the P22B6 code on a 2014 GMC Sierra?

- Possible causes include a faulty oxygen sensor (Sensor 2), damaged wiring or connectors in the sensor circuit, or issues with the sensor heater circuit.

4. How can I diagnose the HO2S Pump Current Trim Circuit Low Voltage Sensor 2 issue on a 2014 GMC Sierra?

- Diagnosis typically involves using an OBDII scanner to retrieve the specific fault code, inspecting the oxygen sensor wiring and connectors, and testing the sensor's operation.

5. Can I continue driving my 2014 GMC Sierra with the P22B6 code present?

- It is not recommended to continue driving with this code present, as it can lead to further engine damage or poor performance if left unresolved.

6. How can I repair the HO2S Pump Current Trim Circuit Low Voltage Sensor 2 problem in my 2014 GMC Sierra?

- Repair options may include replacing the oxygen sensor (Sensor 2), repairing or replacing damaged wiring or connectors, and resetting the fault code using an OBDII scanner.

7. Are there any DIY tips for fixing the P22B6 code on a 2014 GMC Sierra?

- While some basic troubleshooting steps can be taken, it's recommended to seek professional help for diagnosing and repairing this specific code to ensure proper resolution.

8. What is the typical cost to repair the HO2S Pump Current Trim Circuit Low Voltage Sensor 2 issue in a 2014 GMC Sierra?

- The cost of repairs can vary depending on the exact cause of the issue, but it typically ranges from $200 to $500 for parts and labor.

9. Can a faulty oxygen sensor cause other problems in a 2014 GMC Sierra besides triggering the P22B6 code?

- Yes, a faulty oxygen sensor can lead to decreased fuel efficiency, increased emissions, and potential damage to the catalytic converter if not addressed promptly.

10. How often should I have the oxygen sensors inspected in my 2014 GMC Sierra to prevent the P22B6 code from appearing?

- It's recommended to have the oxygen sensors inspected during regular maintenance intervals or whenever you experience symptoms of poor engine performance to prevent the P22B6 code from appearing.