AutoCodes – Dodge – P22B2 Dodge

P22B2 Dodge Code - O2 Sensor Bank 1 Sensor 2 Return Circuit Open

Quick Answer

The Oxygen Sensor is an input to the Smart Oxygen Sensor Module. Common causes include Faulty O2 Sensor Bank 1 Sensor 2, O2 Sensor Bank 1 Sensor 2 harness is open or shorted, O2 Sensor Bank 1 Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P22B2 Dodge indicates O2 Sensor Bank 1 Sensor 2 Return Circuit Open.
Common causes
Common causes include Faulty O2 Sensor Bank 1 Sensor 2, O2 Sensor Bank 1 Sensor 2 harness is open or shorted, O2 Sensor Bank 1 Sensor 2 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,418
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 20, 2021
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P22B2 Dodge Description

The Oxygen Sensor is an input to the Smart Oxygen Sensor Module. This module is a smart device that receives information, such as dew point flag, engine speed, etc., via the J1939 BUS from the primary Powertrain Control Module (PCM). It provides PCM with the oxygen concentration signal. It also performs its own diagnostics and reports failures back to the primary engine PCM using the J1939 BUS. The PCM then decodes the error message and converts it to a fault code. The PCM will set the Diagnostic Trouble Code (DTC) if it receives an FMI (Failure Mode Indicator) message from the Smart O2 Module.
OBDII Code P22B2 Dodge - O2 Sensor Bank 1 Sensor 2 Return Circuit Open - AutoCodes.com
P22B2 Dodge Code - O2 Sensor Bank 1 Sensor 2 Return Circuit Open

What are the Possible Causes of the DTC P22B2 Dodge?

  • Faulty O2 Sensor Bank 1 Sensor 2
  • O2 Sensor Bank 1 Sensor 2 harness is open or shorted
  • O2 Sensor Bank 1 Sensor 2 circuit poor electrical connection
  • Faulty Smart Oxygen Sensor Module

How to Fix the DTC P22B2 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P22B2 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P22B2 Dodge code?

Need more information on how to fix the P22B2 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P22B2 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P22B2 Dodge Code

1. What does the OBDII code P22B2 mean on a Dodge vehicle?

P22B2 indicates that the oxygen (O2) sensor return circuit for Bank 1 Sensor 2 is open, meaning the sensor is not properly communicating with the vehicle's engine control module (ECM).

2. What are the symptoms of a P22B2 code in a Dodge vehicle?

Common symptoms include decreased fuel efficiency, rough idling, potential illumination of the check engine light, and possibly reduced engine performance.

3. What causes the P22B2 code to appear?

The code can be triggered by a damaged O2 sensor, faulty wiring or connectors in the return circuit, a malfunctioning ECM, or corrosion in the electrical connections.

4. Where is Bank 1 Sensor 2 located on a Dodge vehicle?

Bank 1 Sensor 2 refers to the downstream O2 sensor located behind the catalytic converter on the side of the engine with cylinder one.

5. Can I drive my Dodge with a P22B2 code?

While driving with this code may be possible, it is not recommended as it can lead to poor fuel efficiency and potential damage to the catalytic converter over time.

6. How do I fix the P22B2 code on my Dodge?

Repairs may involve inspecting and repairing damaged wiring, replacing the O2 sensor, cleaning corroded connectors, or in rare cases, reprogramming or replacing the ECM.

7. How can I diagnose the P22B2 code?

Start by visually inspecting the wiring and connectors for damage or corrosion, then test the O2 sensor's functionality using a multimeter or scan tool to verify proper operation.

8. How much does it cost to fix a P22B2 code on a Dodge?

Costs can vary, but replacing an O2 sensor typically ranges from $100 to $300, while repairing wiring or connectors might be less expensive. ECM repairs or replacements can cost significantly more.

9. Can a bad catalytic converter cause the P22B2 code?

While not a direct cause, a failing catalytic converter can affect downstream O2 sensor readings, potentially contributing to related circuit issues.

10. Will clearing the P22B2 code with a scan tool fix the problem?

Clearing the code will temporarily turn off the check engine light, but if the underlying issue isn't resolved, the code will return.

Discuss the causes and fixes for P22B2 Dodge OBDII Code

Code P22B2 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play