AutoCodes – GMC – P22A9 2018 GMC Sierra

P22A9 2018 GMC Sierra Code - NOx Sensor 2 Heater Feedback Circuit Low Voltage

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P22A9 2018 GMC Sierra indicates NOx Sensor 2 Heater Feedback Circuit Low Voltage.
Common causes: Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 334

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 24, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P22A9 2018 GMC Sierra Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.

OBDII Code P22A9 2018 GMC Sierra - NOx Sensor 2 Heater Feedback Circuit Low Voltage - AutoCodes.com — P22A9 2018 GMC Sierra Code - NOx Sensor 2 Heater Feedback Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P22A9 2018 GMC Sierra?

Faulty Nitrogen Oxides (NOx) Sensor 2
Nitrogen Oxides Sensor 2 harness is open or shorted
Nitrogen Oxides Sensor 2 circuit poor electrical connection

How to Fix the DTC P22A9 2018 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P22A9 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P22A9 2018 GMC Sierra code?

Need more information on how to fix the P22A9 2018 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P22A9 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P22A9 2018 GMC Sierra Code

What does the OBDII code P22A9 mean for a 2018 GMC Sierra?

The code P22A9 indicates a problem with the NOx Sensor 2 Heater Feedback Circuit, specifically detecting low voltage.

What are the common symptoms of code P22A9 in a 2018 GMC Sierra?

Symptoms may include the check engine light turning on, decreased fuel efficiency, reduced engine performance, and potential issues with emissions system compliance.

What causes the P22A9 code to appear in a 2018 GMC Sierra?

Common causes include a faulty NOx sensor, damaged wiring or connectors in the sensor circuit, a blown fuse, or a malfunctioning engine control module (ECM).

Can I drive my 2018 GMC Sierra with a P22A9 code?

While it may be drivable, itâ€™s not recommended as the issue can lead to increased emissions, poor fuel economy, and potential damage to the emissions system if left unresolved.

How do I diagnose the P22A9 code in a 2018 GMC Sierra?

Diagnosis involves scanning the vehicle with an OBDII scanner, inspecting the NOx sensor 2 and its wiring for damage, checking for blown fuses, and testing the heater circuit for proper voltage.

What is the function of NOx Sensor 2 in a 2018 GMC Sierra?

NOx Sensor 2 monitors nitrogen oxide levels in the exhaust downstream and ensures the emissions system operates efficiently, including proper functioning of the selective catalytic reduction (SCR) system.

How do I fix the P22A9 code on a 2018 GMC Sierra?

Repairs may include replacing the NOx sensor 2, repairing or replacing damaged wiring or connectors, replacing a blown fuse, or reprogramming the ECM if necessary.

How much does it cost to fix a P22A9 code on a 2018 GMC Sierra?

The repair cost can vary but typically ranges from $300 to $800, depending on whether the NOx sensor needs replacement or if additional wiring repairs are required.

Can a dirty or clogged exhaust system cause the P22A9 code?

While a dirty exhaust system is not a direct cause, it can contribute to sensor failure or reduced efficiency of the emissions system, potentially triggering the code.

Do I need to reset the code after fixing the issue?

Yes, after repairs are completed, the code should be cleared using an OBDII scanner, and the vehicle should be driven to ensure the issue is resolved and the code does not return.