AutoCodes – GMC – P22A9 2015 GMC Sierra

P22A9 2015 GMC Sierra Code - NOx Sensor 2 Heater Feedback Circuit Low Voltage

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P22A9 2015 GMC Sierra indicates NOx Sensor 2 Heater Feedback Circuit Low Voltage.
Common causes: Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 144

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 24, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P22A9 2015 GMC Sierra Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.

OBDII Code P22A9 2015 GMC Sierra - NOx Sensor 2 Heater Feedback Circuit Low Voltage - AutoCodes.com — P22A9 2015 GMC Sierra Code - NOx Sensor 2 Heater Feedback Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P22A9 2015 GMC Sierra?

Faulty Nitrogen Oxides (NOx) Sensor 2
Nitrogen Oxides Sensor 2 harness is open or shorted
Nitrogen Oxides Sensor 2 circuit poor electrical connection

How to Fix the DTC P22A9 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P22A9 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P22A9 2015 GMC Sierra code?

Need more information on how to fix the P22A9 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P22A9 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P22A9 2015 GMC Sierra Code

1. What does the OBDII code P22A9 mean on a 2015 GMC Sierra?

P22A9 refers to a problem with the NOx Sensor 2 Heater Feedback Circuit, indicating low voltage detected in the circuit.

2. What are the common symptoms of code P22A9 in a 2015 GMC Sierra?

Symptoms may include a check engine light, reduced engine performance, increased emissions, and potential activation of limp mode.

3. What causes the P22A9 code to appear on a 2015 GMC Sierra?

Common causes include a faulty NOx sensor, damaged wiring or connectors, a malfunctioning NOx sensor heater, or a failed PCM.

4. How does the NOx sensor heater affect the vehicleâ€™s performance?

The NOx sensor heater ensures the sensor reaches optimal operating temperature quickly, enabling accurate emission readings. A failure can lead to increased emissions and poor engine performance.

5. Can I continue driving with the P22A9 code in my 2015 GMC Sierra?

While the truck may still be drivable, ignoring the code can lead to further engine or emissions system damage and reduced fuel efficiency. Prompt diagnosis and repair are recommended.

6. How do I diagnose the P22A9 code on my 2015 GMC Sierra?

Use an OBDII scanner to confirm the code, then inspect the NOx sensor 2 wiring and connectors for damage. Test the sensor heater circuit for proper voltage and resistance.

7. How much does it cost to fix the P22A9 code on a 2015 GMC Sierra?

Repair costs vary but typically range from $200 to $700, depending on whether the NOx sensor needs replacement or if wiring repairs are required.

8. Can a faulty NOx sensor cause other issues in the 2015 GMC Sierra?

Yes, a faulty NOx sensor can lead to increased emissions, poor fuel economy, and potential failure to pass emissions testing.

9. Is the P22A9 code covered under warranty for a 2015 GMC Sierra?

It depends on the mileage and warranty terms. Emissions-related parts may be covered under the federal emissions warranty, so check with your dealer.

10. What tools are needed to repair the P22A9 code on a 2015 GMC Sierra?

Youâ€™ll need an OBDII scanner, multimeter, and possibly a socket set for sensor replacement. Advanced diagnostics may require a repair manual or wiring diagram.