P229F Chevrolet Code - NOx Sensor Circuit Range/Performance Bank 2
Quick Answer
The reductant system uses two Nitrogen Oxide (NOx) sensors to monitor the amount of NOx in the engine's exhaust gas. Common causes include Faulty Nitrogen Oxide (NOx) Sensor Bank 2, Nitrogen Oxide (NOx) Sensor Bank 2 harness is open or shorted, Nitrogen Oxide (NOx) Sensor Bank 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P229F Chevrolet indicates NOx Sensor Circuit Range/Performance Bank 2.
- Common causes
- Common causes include Faulty Nitrogen Oxide (NOx) Sensor Bank 2, Nitrogen Oxide (NOx) Sensor Bank 2 harness is open or shorted, Nitrogen Oxide (NOx) Sensor Bank 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P229F Chevrolet Description
Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust.
The ECM varies the amount of Diesel Exhaust Fluid (DEF) or reductant added by varying the reductant injector duty cycle in response to changes in engine exhaust out NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module.
What are the Possible Causes of the DTC P229F Chevrolet?
- Faulty Nitrogen Oxide (NOx) Sensor Bank 2
- Nitrogen Oxide (NOx) Sensor Bank 2 harness is open or shorted
- Nitrogen Oxide (NOx) Sensor Bank 2 circuit poor electrical connection
How to Fix the DTC P229F Chevrolet?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P229F Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P229F Chevrolet code?
Need more information on how to fix the P229F Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P229F Chevrolet code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P229F Chevrolet Code
1. What are the common symptoms of OBDII code P229F (NOx Sensor Circuit Range/Performance Bank 2) in a Chevrolet?
- Common symptoms include reduced engine performance, decreased fuel efficiency, rough idling, and the illumination of the check engine light.
2. What can cause the OBDII code P229F to be triggered in a Chevrolet?
- The code P229F is typically triggered by issues such as a faulty NOx sensor, wiring problems, exhaust system leaks, or issues with the engine control module.
3. How serious is the OBDII code P229F in a Chevrolet?
- While the code may not cause immediate drivability issues, it can lead to increased emissions and potential long-term damage to the engine if left unresolved.
4. How can I diagnose the cause of the OBDII code P229F in my Chevrolet?
- Diagnosis typically involves using a scan tool to read the code, inspecting the NOx sensor and its wiring, checking for exhaust leaks, and performing a thorough inspection of the engine control module.
5. Can I continue driving my Chevrolet with the OBDII code P229F present?
- It is generally not recommended to ignore the code and continue driving, as it can lead to increased emissions and potential further damage to the vehicle.
6. What are some possible repair options for fixing the OBDII code P229F in a Chevrolet?
- Repair options may include replacing the NOx sensor, repairing or replacing damaged wiring, fixing exhaust leaks, or reprogramming the engine control module.
7. How much does it cost to fix the OBDII code P229F in a Chevrolet?
- The cost of fixing the code can vary depending on the specific issue causing it, but it may range from a few hundred to over a thousand dollars, including parts and labor.
8. Can I reset the check engine light after fixing the OBDII code P229F in my Chevrolet?
- Yes, the check engine light can be reset using a scan tool after the issue causing the code has been successfully repaired.
9. Are there any preventative maintenance tips to avoid triggering the OBDII code P229F in a Chevrolet?
- Regularly inspecting the exhaust system, ensuring proper engine maintenance, and using high-quality fuel can help prevent issues that may trigger the code.
10. Is the OBDII code P229F covered under any Chevrolet warranty?
- Depending on the specific circumstances and warranty coverage, the repair for the code P229F may be covered under certain Chevrolet warranties. It is recommended to check with a Chevrolet dealership for more information.
Discuss the causes and fixes for P229F Chevrolet OBDII Code
Code P229F Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
