P2292 Dodge Code - Injector Control Pressure Erratic
Quick Answer
The Powertrain Control Module (PCM) monitors the Injector Control Pressure (ICP) sensor. Common causes include Faulty Injector Control Pressure (ICP) sensor, Injector Control Pressure (ICP) sensor harness is open or shorted, Injector Control Pressure (ICP) sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2292 Dodge indicates Injector Control Pressure Erratic.
- Common causes
- Common causes include Faulty Injector Control Pressure (ICP) sensor, Injector Control Pressure (ICP) sensor harness is open or shorted, Injector Control Pressure (ICP) sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2292 Dodge Description
The ICP sensor is a variable capacitance sensor that, when supplied with a 5-volts reference signal from the PCM, produces a linear analog voltage signal that indicates pressure.
The ICP sensor's primary function is to provide a feedback signal to indicate rail pressure so that the PCM con command the correct injector timing and pulse width and the correct injection control pressure for the proper fuel delivery at all speed and load conditions.
What are the Possible Causes of the DTC P2292 Dodge?
- Faulty Injector Control Pressure (ICP) sensor
- Injector Control Pressure (ICP) sensor harness is open or shorted
- Injector Control Pressure (ICP) sensor circuit poor electrical connection
How to Fix the DTC P2292 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2292 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2292 Dodge code?
Need more information on how to fix the P2292 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2292 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2292 Dodge Code
1. What does the OBDII code P2292 mean for a Dodge vehicle?
P2292 indicates "Injector Control Pressure Erratic," meaning the fuel injector control pressure is fluctuating outside the expected range.
2. What are the common symptoms of code P2292 in a Dodge?
Symptoms include engine misfires, rough idling, reduced fuel efficiency, sluggish acceleration, and possibly the engine failing to start.
3. What causes the P2292 code to appear on a Dodge?
Common causes include a faulty fuel injector control pressure sensor, issues with the high-pressure oil system, damaged wiring or connectors, or a failing fuel pump.
4. Can driving with code P2292 damage my Dodge engine?
Yes, driving with this code can lead to further engine damage or poor performance due to incorrect fuel delivery.
5. How do I diagnose code P2292 on a Dodge?
Use an OBDII scanner to retrieve the code, inspect the injector control pressure sensor, check wiring and connectors, and test the fuel pressure.
6. What repairs are typically needed for a P2292 code?
Repairs may include replacing the fuel injector control pressure sensor, repairing damaged wiring, or addressing issues in the high-pressure fuel system.
7. Can a dirty fuel filter cause the P2292 code on a Dodge?
Yes, a clogged fuel filter can restrict fuel flow and lead to erratic injector control pressure.
8. How much does it cost to fix code P2292 on a Dodge?
Repairs can range from $100 to $500 or more, depending on whether the sensor, wiring, or fuel system components need replacement.
9. Can low oil levels trigger the P2292 code?
Yes, insufficient oil levels can affect the high-pressure oil system, which is essential for proper injector control pressure.
10. Is a professional mechanic required to fix code P2292 on a Dodge?
While some DIYers can handle basic repairs, diagnosing and repairing injector control pressure issues often requires specialized tools and expertise.
Discuss the causes and fixes for P2292 Dodge OBDII Code
Code P2292 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
