P2291 DODGE - Injector Control Pressure Too Low Engine Cranking
P2291 DODGE Possible Causes
- Faulty Injector Control Pressure (ICP) sensor
- Injector Control Pressure (ICP) sensor harness is open or shorted
- Injector Control Pressure (ICP) sensor circuit poor electrical connection
First diagnose P2291 DODGE code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P2291 DODGE code
Labor: 1.0The cost of diagnosing the P2291 DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
P2291 DODGE Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2291 Dodge DescriptionThe Powertrain Control Module (PCM) monitors the Injector Control Pressure (ICP) sensor. The code sets when the signal from the sensor is out of factory specifications, and the PCM will go to open loop control of injection control pressure (operate from an estimated injection control pressure).
The ICP sensor is a variable capacitance sensor that, when supplied with a 5-volts reference signal from the PCM, produces a linear analog voltage signal that indicates pressure.
The ICP sensor's primary function is to provide a feedback signal to indicate rail pressure so that the PCM con command the correct injector timing and pulse width and the correct injection control pressure for the proper fuel delivery at all speed and load conditions.
P2291 DODGE More InformationNeed more information on how to fix the P2291 DODGE code?
Get Access to Factory Service Manuals
Need more help?Get the P2291 Dodge code diagnosed by a professional: Find a repair shop in your area
P2291 DODGE CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2291 Dodge code? Have you replaced any parts?
Any information is appreciated. Thanks