P228C 2015 GMC Sierra Code - Fuel Pressure Regulator Control Performance Low Pressure
Quick Answer
The fuel rail pressure sensor detects fuel pressure within the fuel rail. Common causes include Faulty Fuel Rail Pressure Sensor, High Pressure Fuel Pump harness is open or shorted, High Pressure Fuel Pump electrical circuit poor connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P228C 2015 GMC Sierra indicates Fuel Pressure Regulator Control Performance Low Pressure.
- Common causes
- Common causes include Faulty Fuel Rail Pressure Sensor, High Pressure Fuel Pump harness is open or shorted, High Pressure Fuel Pump electrical circuit poor connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P228C 2015 GMC Sierra Description
High pressure fuel is regulated by the high-pressure fuel pump actuator, which is a part of the high-pressure fuel pump. The high-pressure fuel pump actuator is a solenoid valve. The ECM provides a voltage on the actuator high control circuit and ground on the actuator low control circuit. Both circuits are controlled through output drivers within the ECM. When deactivated, both drivers are disabled. When activated, the high control circuit driver energizes the high-pressure fuel pump actuator, and the low control circuit driver Pulse-Width Modulates (PWM) the low control circuit to ground.
The high-pressure mechanical fuel pump is driven by three lobes on the camshaft. The ECM uses the camshaft and crankshaft position sensor inputs to synchronize the high-pressure fuel pump actuator with the position of each of the camshaft lobes. The ECM regulates fuel pressure by adjusting the portion of each pump stroke that provides fuel to the rail.
The ECM monitors the fuel rail fuel pressure sensor and the high-pressure fuel pump actuator to determine if the commanded and actual pressure are within a predetermined range, or if the amount of fuel pressure correction exceeds a calibrated pressure.
The Diagnostic Trouble Code (DTC) will set if the actual fuel rail pressure is 3 MPa (435 psi) less than the desired fuel pressure. The condition exists for greater than 5 s.
What are the Possible Causes of the DTC P228C 2015 GMC Sierra?
- Faulty Fuel Rail Pressure Sensor
- High Pressure Fuel Pump harness is open or shorted
- High Pressure Fuel Pump electrical circuit poor connection
- Faulty High Pressure Fuel Pump
How to Fix the DTC P228C 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P228C 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P228C 2015 GMC Sierra code?
Need more information on how to fix the P228C 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P228C 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P228C 2015 GMC Sierra Code
What does the OBDII code P228C mean on a 2015 GMC Sierra?
P228C indicates that the engine control module (ECM) has detected a performance issue with the fuel pressure regulator control, specifically low fuel pressure.
What are the common symptoms of the P228C code in a 2015 GMC Sierra?
Symptoms may include poor engine performance, difficulty starting, reduced fuel efficiency, rough idle, or the Check Engine Light illuminating.
What causes the P228C code to appear on a 2015 GMC Sierra?
Common causes include a faulty fuel pressure sensor, a malfunctioning fuel pump, a clogged fuel filter, or wiring/connectivity issues in the fuel pressure regulator circuit.
Can I drive my 2015 GMC Sierra with the P228C code?
Driving with the P228C code is not recommended, as it can cause further engine damage or lead to unsafe driving conditions due to poor fuel delivery and performance.
How do you diagnose the P228C code on a 2015 GMC Sierra?
Diagnosis involves scanning for codes, inspecting the fuel pressure sensor and its wiring, testing the fuel pump, and checking the fuel pressure with a diagnostic tool.
What repairs are commonly needed to fix the P228C code on a 2015 GMC Sierra?
Repairs may include replacing the fuel pressure sensor, cleaning or replacing the fuel filter, repairing damaged wiring, or replacing the fuel pump if it's faulty.
How much does it typically cost to fix the P228C code on a 2015 GMC Sierra?
Repair costs vary but typically range from $150 to $800, depending on whether the issue involves the fuel sensor, pump, or other components.
Can a bad fuel filter cause the P228C code on a 2015 GMC Sierra?
Yes, a clogged fuel filter can restrict fuel flow, leading to low fuel pressure and triggering the P228C code.
How can I prevent the P228C code from occurring on my 2015 GMC Sierra?
Regular maintenance, such as replacing the fuel filter on schedule, using high-quality fuel, and inspecting the fuel system periodically, can help prevent the code.
Does the P228C code always mean the fuel pump is bad on a 2015 GMC Sierra?
No, while a faulty fuel pump is one possible cause, the issue could also be with the fuel pressure sensor, wiring, or other components in the fuel system.
Discuss the causes and fixes for P228C 2015 GMC Sierra OBDII Code
Code P228C 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
