P227E Buick Code - Barometric Pressure Sensor 2 Circuit Erratic
Quick Answer
The Barometric Pressure (BARO) Sensor 2, also referred to as the Turbocharger Inlet Air Pressure (TCIAP) sensor, is integral to the Multifunction Intake Air Sensor and is used for humidity sensor signal correction. Common causes include Faulty Multifunction Intake Air Sensor, Multifunction Intake Air Sensor harness is open or shorted, Multifunction Intake Air Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P227E Buick indicates Barometric Pressure Sensor 2 Circuit Erratic.
- Common causes
- Common causes include Faulty Multifunction Intake Air Sensor, Multifunction Intake Air Sensor harness is open or shorted, Multifunction Intake Air Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P227E Buick Description
- Intake Air Temperature (IAT) Sensor 1
- IAT Sensor 2
- Humidity Sensor
- Mass Air Flow (MAF) Sensor
- Turbocharger Inlet Air Pressure (TCIAP) Sensor (BARO 2)
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the BARO sensor pressure signal had an accumulated variation, over a 10 s sample period, of greater than 100 kPa (14.5 PSI).
What are the Possible Causes of the DTC P227E Buick?
- Faulty Multifunction Intake Air Sensor
- Multifunction Intake Air Sensor harness is open or shorted
- Multifunction Intake Air Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P227E Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P227E Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P227E Buick code?
Need more information on how to fix the P227E Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P227E Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P227E Buick Code
1. What are the common symptoms of OBDII code P227E in a Buick related to the Barometric Pressure Sensor 2 Circuit Erratic?
- The common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and potential stalling.
2. What are the possible causes of the P227E code in a Buick?
- The code may be triggered by a faulty barometric pressure sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module.
3. How can I diagnose the P227E code in my Buick?
- Diagnosing the code involves using an OBDII scanner to retrieve the code, checking the barometric pressure sensor readings, inspecting the sensor wiring, and testing the sensor's functionality.
4. Can a DIY enthusiast repair the P227E code on a Buick?
- Repairing the code may require advanced automotive knowledge and tools. It is recommended to consult a professional mechanic for accurate diagnosis and repair.
5. What are some repair tips for fixing the P227E code in a Buick?
- Some repair tips include checking and cleaning the sensor connectors, replacing the barometric pressure sensor if faulty, and ensuring proper wiring connections.
6. Is it safe to drive my Buick with the P227E code illuminated?
- It is not recommended to drive your Buick with the P227E code active, as it can lead to further engine damage and potential safety hazards. It is advisable to address the issue promptly.
7. Will resetting the OBDII system clear the P227E code in a Buick?
- Resetting the OBDII system may temporarily clear the code, but if the underlying issue causing the code is not addressed, it is likely to return. Proper diagnosis and repair are necessary.
8. How much does it typically cost to repair the P227E code in a Buick?
- The cost of repairing the P227E code can vary depending on the specific cause of the issue, parts needed for replacement, and labor costs. It is advisable to obtain quotes from reputable mechanics.
9. Can extreme weather conditions affect the triggering of the P227E code in a Buick?
- Extreme weather conditions can potentially impact the barometric pressure sensor readings, leading to the erratic circuit behavior that triggers the P227E code.
10. How long does it usually take to repair the P227E code in a Buick?
- The repair time for the P227E code can vary based on the complexity of the issue, availability of parts, and the mechanic's workload. It is recommended to inquire about the estimated repair time before proceeding.
Discuss the causes and fixes for P227E Buick OBDII Code
Code P227E Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
