P227D Code - Barometric Pressure Sensor 2 Circuit High Voltage
Quick Answer
The Barometric Pressure (BARO) Sensor 2, also referred to as the Turbocharger Inlet Air Pressure (TCIAP) sensor, is integral to the Multifunction Intake Air Sensor and is used for humidity sensor signal correction. Common causes include Faulty Multifunction Intake Air Sensor, Multifunction Intake Air Sensor harness is open or shorted, Multifunction Intake Air Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P227D indicates Barometric Pressure Sensor 2 Circuit High Voltage.
- Common causes
- Common causes include Faulty Multifunction Intake Air Sensor, Multifunction Intake Air Sensor harness is open or shorted, Multifunction Intake Air Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P227D Description
- Intake Air Temperature (IAT) Sensor 1
- IAT Sensor 2
- Humidity Sensor
- Mass Air Flow (MAF) Sensor
- Turbocharger Inlet Air Pressure (TCIAP) Sensor (BARO 2)
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the BARO sensor pressure is greater than 115 kPa (16.7 PSI) for greater than 5 s.
What are the Possible Causes of the DTC P227D?
- Faulty Multifunction Intake Air Sensor
- Multifunction Intake Air Sensor harness is open or shorted
- Multifunction Intake Air Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P227D?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P227D code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P227D code?
Need more information on how to fix the P227D code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P227D code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P227D Buick — Barometric Pressure Sensor 2 Circuit High Voltage
- P227D Cadillac — Barometric Pressure Sensor 2 Circuit High Voltage
- P227D Chevrolet — Barometric Pressure Sensor 2 Circuit High Voltage
- P227D GMC — Barometric Pressure Sensor 2 Circuit High Voltage
Frequently Asked Questions about P227D Code
1. What are the common symptoms of OBDII code P227D (Barometric Pressure Sensor 2 Circuit High Voltage)?
- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and the illumination of the check engine light.
2. What are the possible causes of OBDII code P227D?
- The code P227D can be caused by a faulty barometric pressure sensor, damaged wiring or connectors related to the sensor, or issues with the engine control module (ECM).
3. How can I diagnose OBDII code P227D?
- Diagnosis typically involves using an OBDII scanner to retrieve the code, checking the barometric pressure sensor for proper operation, inspecting the sensor's wiring and connectors, and testing the ECM for any faults.
4. Can I drive my vehicle with OBDII code P227D?
- It is not recommended to drive your vehicle with OBDII code P227D, as it can lead to further engine damage and reduced performance. It is best to address the issue promptly.
5. How can I repair OBDII code P227D?
- Repairing OBDII code P227D may involve replacing the barometric pressure sensor, repairing or replacing damaged wiring or connectors, or reprogramming the ECM if necessary.
6. Is it possible to reset OBDII code P227D without repairs?
- While you can clear the code temporarily with an OBDII scanner, the underlying issue causing the code will persist until properly addressed. Resetting the code without repairs is not a permanent solution.
7. Can a DIY enthusiast fix OBDII code P227D at home?
- Depending on your experience and tools available, some DIY enthusiasts may be able to replace the barometric pressure sensor or check and repair wiring issues causing the code. However, more complex diagnostics may require professional help.
8. What other OBDII codes may be related to P227D (Barometric Pressure Sensor 2 Circuit High Voltage)?
- Other related OBDII codes may include P227C (Barometric Pressure Sensor 2 Circuit Low Voltage) or codes related to MAP (Manifold Absolute Pressure) sensor performance.
9. How important is the barometric pressure sensor in a vehicle's operation?
- The barometric pressure sensor plays a crucial role in determining the air density and adjusting fuel delivery for optimal engine performance and efficiency. A malfunctioning sensor can impact various aspects of vehicle operation.
10. Can extreme weather conditions affect the barometric pressure sensor and trigger code P227D?
- Yes, extreme weather conditions such as severe temperature changes or high altitude can affect the barometric pressure sensor's performance, potentially leading to the triggering of code P227D.
Discuss the causes and fixes for P227D OBDII Code
Code P227D comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
