P227C Buick Code - Barometric Pressure Sensor 2 Circuit Low Voltage
Quick Answer
The Barometric Pressure (BARO) Sensor 2, also referred to as the Turbocharger Inlet Air Pressure (TCIAP) sensor, is integral to the Multifunction Intake Air Sensor and is used for humidity sensor signal correction. Common causes include Faulty Multifunction Intake Air Sensor, Multifunction Intake Air Sensor harness is open or shorted, Multifunction Intake Air Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P227C Buick indicates Barometric Pressure Sensor 2 Circuit Low Voltage.
- Common causes
- Common causes include Faulty Multifunction Intake Air Sensor, Multifunction Intake Air Sensor harness is open or shorted, Multifunction Intake Air Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P227C Buick Description
- Intake Air Temperature (IAT) Sensor 1
- IAT Sensor 2
- Humidity Sensor
- Mass Air Flow (MAF) Sensor
- Turbocharger Inlet Air Pressure (TCIAP) Sensor (BARO 2)
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the BARO sensor pressure is less than 44 kPa (6.4 PSI) for greater than 5 s.
What are the Possible Causes of the DTC P227C Buick?
- Faulty Multifunction Intake Air Sensor
- Multifunction Intake Air Sensor harness is open or shorted
- Multifunction Intake Air Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P227C Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P227C Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P227C Buick code?
Need more information on how to fix the P227C Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P227C Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P227C Buick Code
What does the OBDII code P227C mean on a Buick?
The code P227C indicates that the Barometric Pressure Sensor 2 Circuit is experiencing low voltage, which may affect the vehicle's ability to properly monitor air pressure.
What are the symptoms of code P227C in a Buick?
Symptoms may include poor engine performance, reduced fuel efficiency, difficulty starting the engine, and the check engine light being illuminated.
What causes the P227C code to appear in a Buick?
Common causes include a faulty barometric pressure sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module (ECM).
Can I drive my Buick with the P227C code?
Driving with this code is not recommended, as it can lead to poor engine performance and potentially cause further damage if left unaddressed.
How do I diagnose the P227C code on my Buick?
Diagnosing involves using an OBDII scanner to confirm the code, inspecting the barometric pressure sensor and its wiring, and testing the sensor voltage with a multimeter.
How is the P227C code repaired in a Buick?
Repairs may include replacing the barometric pressure sensor, repairing or replacing damaged wiring, or reprogramming or replacing the ECM if necessary.
Where is the barometric pressure sensor located in a Buick?
The barometric pressure sensor is typically located near the intake manifold or integrated into the ECM, but its exact location can vary by model.
What tools do I need to fix the P227C code on a Buick?
You will need an OBDII scanner, a multimeter to test voltage, and basic hand tools for inspecting and replacing components.
How much does it cost to repair the P227C code in a Buick?
Repair costs can range from $100 to $400, depending on whether the barometric pressure sensor needs replacement or if additional repairs are required.
Can a dirty air filter cause the P227C code in a Buick?
While a dirty air filter can affect engine performance, it is unlikely to directly cause the P227C code, which is specific to the barometric pressure sensor circuit.
Discuss the causes and fixes for P227C Buick OBDII Code
Code P227C Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
