P227C 2018 GMC Sierra Code - Barometric Pressure Sensor 2 Circuit Low Voltage
Quick Answer
The Barometric Pressure (BARO) Sensor 2, also referred to as the Turbocharger Inlet Air Pressure (TCIAP) sensor, is integral to the Multifunction Intake Air Sensor and is used for humidity sensor signal correction. Common causes include Faulty Multifunction Intake Air Sensor, Multifunction Intake Air Sensor harness is open or shorted, Multifunction Intake Air Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P227C 2018 GMC Sierra indicates Barometric Pressure Sensor 2 Circuit Low Voltage.
- Common causes
- Common causes include Faulty Multifunction Intake Air Sensor, Multifunction Intake Air Sensor harness is open or shorted, Multifunction Intake Air Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P227C 2018 GMC Sierra Description
- Intake Air Temperature (IAT) Sensor 1
- IAT Sensor 2
- Humidity Sensor
- Mass Air Flow (MAF) Sensor
- Turbocharger Inlet Air Pressure (TCIAP) Sensor (BARO 2)
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the BARO sensor pressure is less than 44 kPa (6.4 PSI) for greater than 5 s.
What are the Possible Causes of the DTC P227C 2018 GMC Sierra?
- Faulty Multifunction Intake Air Sensor
- Multifunction Intake Air Sensor harness is open or shorted
- Multifunction Intake Air Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P227C 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P227C 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P227C 2018 GMC Sierra code?
Need more information on how to fix the P227C 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P227C 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P227C 2018 GMC Sierra Code
What does the OBDII code P227C mean on a 2018 GMC Sierra?
1. P227C indicates that the Barometric Pressure Sensor 2 is reporting a low voltage issue, which can affect engine performance and emissions control. 2.
What are the common symptoms of a P227C code in a 2018 GMC Sierra?
Symptoms may include poor engine performance, reduced fuel efficiency, rough idling, or the Check Engine Light being illuminated. 3.
What causes the P227C code to appear?
Common causes include a faulty Barometric Pressure Sensor 2, damaged wiring or connectors, or issues with the powertrain control module (PCM). 4.
Can I drive my 2018 GMC Sierra with a P227C code?
While the truck may still operate, driving with this code can lead to poor fuel economy, reduced performance, and potential long-term damage to the engine or emissions system. 5.
How do I diagnose a P227C code in my GMC Sierra?
Start by inspecting the wiring and connectors for damage or corrosion, testing the Barometric Pressure Sensor 2, and using a scan tool to check for related codes or sensor readings. 6.
How do I fix the P227C code on a 2018 GMC Sierra?
Repairs may involve replacing the Barometric Pressure Sensor 2, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming/updating the PCM. 7.
Where is Barometric Pressure Sensor 2 located on a 2018 GMC Sierra?
It is typically located in the engine bay, often near the intake manifold or air intake system. Consult your vehicle’s service manual for the exact location. 8.
How much does it cost to fix a P227C code?
The repair costs can vary, but replacing the sensor may cost between $100 and $300, including parts and labor. Wiring repairs could add to the expense. 9.
Can a dirty air filter cause a P227C code in a GMC Sierra?
While unlikely, a severely clogged air filter can impact air intake pressure readings, potentially contributing to related issues. 10.
Do I need to clear the code after fixing the issue?
Yes, after completing the necessary repairs, use a scan tool to clear the code and verify if the problem has been resolved.
Discuss the causes and fixes for P227C 2018 GMC Sierra OBDII Code
Code P227C 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
