P227C 2017 GMC Sierra Code - Barometric Pressure Sensor 2 Circuit Low Voltage
Quick Answer
The Barometric Pressure (BARO) Sensor 2, also referred to as the Turbocharger Inlet Air Pressure (TCIAP) sensor, is integral to the Multifunction Intake Air Sensor and is used for humidity sensor signal correction. Common causes include Faulty Multifunction Intake Air Sensor, Multifunction Intake Air Sensor harness is open or shorted, Multifunction Intake Air Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P227C 2017 GMC Sierra indicates Barometric Pressure Sensor 2 Circuit Low Voltage.
- Common causes
- Common causes include Faulty Multifunction Intake Air Sensor, Multifunction Intake Air Sensor harness is open or shorted, Multifunction Intake Air Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P227C 2017 GMC Sierra Description
- Intake Air Temperature (IAT) Sensor 1
- IAT Sensor 2
- Humidity Sensor
- Mass Air Flow (MAF) Sensor
- Turbocharger Inlet Air Pressure (TCIAP) Sensor (BARO 2)
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the BARO sensor pressure is less than 44 kPa (6.4 PSI) for greater than 5 s.
What are the Possible Causes of the DTC P227C 2017 GMC Sierra?
- Faulty Multifunction Intake Air Sensor
- Multifunction Intake Air Sensor harness is open or shorted
- Multifunction Intake Air Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P227C 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P227C 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P227C 2017 GMC Sierra code?
Need more information on how to fix the P227C 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P227C 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P227C 2017 GMC Sierra Code
1. What are the common symptoms of OBDII code P227C in a 2017 GMC Sierra?
The common symptoms of OBDII code P227C in a 2017 GMC Sierra include poor engine performance, reduced fuel efficiency, and in some cases, the check engine light may illuminate.
2. What does the OBDII code P227C "Barometric Pressure Sensor 2 Circuit Low Voltage" mean for a 2017 GMC Sierra?
The OBDII code P227C indicates that there is a low voltage condition detected in the circuit of Barometric Pressure Sensor 2 in a 2017 GMC Sierra.
3. What are the possible causes of OBDII code P227C in a 2017 GMC Sierra?
Possible causes of OBDII code P227C in a 2017 GMC Sierra include a faulty barometric pressure sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module.
4. How can I diagnose the OBDII code P227C in my 2017 GMC Sierra?
Diagnosing the OBDII code P227C in a 2017 GMC Sierra involves using a scan tool to retrieve the code, inspecting the barometric pressure sensor and its circuit for any visible damage, and testing the sensor's voltage and resistance.
5. Can I continue driving my 2017 GMC Sierra with OBDII code P227C?
It is not recommended to continue driving your 2017 GMC Sierra with OBDII code P227C, as it can lead to further engine damage and poor performance. It's best to address the issue promptly.
6. How can I repair OBDII code P227C in a 2017 GMC Sierra?
Repairing OBDII code P227C in a 2017 GMC Sierra may involve replacing the barometric pressure sensor, repairing or replacing any damaged wiring or connectors, or reprogramming the engine control module.
7. Is it possible to reset the OBDII code P227C in a 2017 GMC Sierra without fixing the issue?
Resetting the OBDII code P227C without fixing the underlying issue is not recommended, as the problem will likely reoccur, and it may lead to more severe engine issues over time.
8. How much does it typically cost to repair OBDII code P227C in a 2017 GMC Sierra?
The cost of repairing OBDII code P227C in a 2017 GMC Sierra can vary depending on the root cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast fix OBDII code P227C in a 2017 GMC Sierra?
While some DIY enthusiasts may be able to diagnose and repair OBDII code P227C in a 2017 GMC Sierra, it is recommended to have the issue addressed by a professional mechanic to ensure proper diagnosis and repair.
10. How long does it take to repair OBDII code P227C in a 2017 GMC Sierra?
The repair time for OBDII code P227C in a 2017 GMC Sierra can vary depending on the specific issue, but it may take anywhere from 1 to 3 hours to diagnose and fix the problem.
Discuss the causes and fixes for P227C 2017 GMC Sierra OBDII Code
Code P227C 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
