P227B Code - Barometric Pressure Sensor 2 Performance
Quick Answer
The Barometric Pressure (BARO) Sensor 2, also referred to as the Turbocharger Inlet Air Pressure (TCIAP) sensor, is integral to the Multifunction Intake Air Sensor and is used for humidity sensor signal correction. Common causes include Faulty Multifunction Intake Air Sensor, Multifunction Intake Air Sensor harness is open or shorted, Multifunction Intake Air Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P227B indicates Barometric Pressure Sensor 2 Performance.
- Common causes
- Common causes include Faulty Multifunction Intake Air Sensor, Multifunction Intake Air Sensor harness is open or shorted, Multifunction Intake Air Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P227B Description
- Intake Air Temperature (IAT) Sensor 1
- IAT Sensor 2
- Humidity Sensor
- Mass Air Flow (MAF) Sensor
- Turbocharger Inlet Air Pressure (TCIAP) Sensor (BARO 2)
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the BARO sensor pressure is less than 50 kPa (7.3 PSI) or greater than 115 kPa (16.7 PSI), for greater than 62.5 ms.
What are the Possible Causes of the DTC P227B?
- Faulty Multifunction Intake Air Sensor
- Multifunction Intake Air Sensor harness is open or shorted
- Multifunction Intake Air Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P227B?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P227B code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P227B code?
Need more information on how to fix the P227B code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P227B code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P227B Buick — Barometric Pressure Sensor 2 Performance
- P227B Cadillac — Barometric Pressure Sensor 2 Performance
- P227B Chevrolet — Barometric Pressure Sensor 2 Performance
- P227B GMC — Barometric Pressure Sensor 2 Performance
Frequently Asked Questions about P227B Code
1. What are the common symptoms of OBDII code P227B (Barometric Pressure Sensor 2 Performance)?
The common symptoms include decreased fuel efficiency, rough idling, stalling, and a check engine light illuminated on the dashboard.
2. What are the possible causes of OBDII code P227B?
Possible causes of this code include a faulty barometric pressure sensor, vacuum leaks, issues with the engine's air intake system, or a problem with the engine control module.
3. How can I diagnose the OBDII code P227B?
Diagnosing this code typically involves using an OBDII scanner to retrieve the code, checking the barometric pressure sensor and related components for any visible damage, and performing a thorough inspection of the engine's air intake system.
4. Can I continue driving with OBDII code P227B present?
It is not recommended to continue driving with this code present, as it can lead to further engine damage and reduced performance. It is best to address the issue promptly.
5. How can I repair OBDII code P227B?
Repairing this code may involve replacing the barometric pressure sensor, repairing any vacuum leaks, cleaning the air intake system, or reprogramming the engine control module. It is recommended to consult a professional mechanic for proper diagnosis and repair.
6. Is it safe to reset the OBDII code P227B without fixing the underlying issue?
Resetting the code without fixing the underlying issue may temporarily turn off the check engine light, but the problem will likely resurface. It is important to address the root cause of the code to prevent potential damage to the vehicle.
7. Can a DIY enthusiast fix OBDII code P227B at home?
Depending on the individual's level of automotive knowledge and experience, some DIY enthusiasts may be able to address this code at home. However, it is recommended to seek professional help if unsure about the diagnosis or repair process.
8. How much does it cost to fix OBDII code P227B at a repair shop?
The cost of fixing this code at a repair shop can vary depending on the specific underlying issue, labor rates, and the cost of parts. It is advisable to obtain quotes from different shops to compare prices.
9. How long does it take to repair OBDII code P227B?
The repair time for this code can vary based on the complexity of the issue and the availability of parts. It may take anywhere from a few hours to a full day to complete the repairs.
10. Can extreme weather conditions affect the performance of the barometric pressure sensor triggering OBDII code P227B?
Yes, extreme weather conditions such as severe temperature changes or high humidity levels can potentially affect the performance of the barometric pressure sensor, leading to the triggering of this code.
Discuss the causes and fixes for P227B OBDII Code
Code P227B comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
